Archives :: Processing & Handling :: Liquid, Gas and Air Handling

Displaying 261 - 280 of 817 stories.
May 19, 2011
The Pre-engineered Subsystems are a series of five, standardized subsystems for use in all types of plants and facilities where fluids are processed. Each subsystem features integrated design of key safety and...
May 19, 2011
This new air-atomizing nozzle enables the effective spraying of viscous fluids at very fine atomization but at low flowrates. The XA ER nozzle provides a full cone spray pattern for liquids with...
May 19, 2011
A PTFE diaphragm permits compact construction of this diaphragm pump, and offers cost savings for high-pressure applications. A patented pressure-supported diaphragm-fixation system...
May 19, 2011
Available from this company, the Dickow magnetically coupled centrifugal pumps include the KM series, which handles capacities as high as 65 m3/h at heads up to 65...
May 19, 2011
Last month, this company released the latest version of its valve-sizing software, Nelprof6. The software features two calculation modules that enable the selection of...
May 19, 2011
The check valves type 561 and 562 have been redesigned and complement this company’s line of plastic valves. The standard cone check valve (type 561) seals with medium pressure. Type 562 is equipped...
May 19, 2011
The Type 3738 electronic valve position monitor is a contactless, magneto-resistive sensor system that works with a Namur signal in compliance with IEC 60947-5-6 and is powered by a two-wire...
May 17, 2011
Kobe Steel, Ltd. (Tokyo, Japan; has acquired a 44.3% equity share in Wuxi Compressor Co., Ltd., based in Wuxi, Jiangsu Province, China, after reaching agreement with parent company Wuxi Victor Group Co., Ltd. The investment will enable Kobe Steel to help meet rising demand for process gas (non-standard) compressors in China. The acquisition of the Wuxi shares was made through Kobelco...
May 1, 2011
Pfeiffer Vacuum Large pressure ranges and maximum compression ratios are the ideal site of operation for the gas-cooled roots pump OktaLine G. The pumping speed ranges from 250 to 12,000...
May 1, 2011
This company has upgraded the 4-in. model of its NP Series sliding vane pump with optional electric heating. The completion of the...
May 1, 2011
Hans Turck In cooperation with Parker Hannifin, this firm has developed a valve adapter for its BL67 I/O system as well as the valve series Isys...
May 1, 2011
Swagelok The RHPS series high-flow pressure-reducing and backpressure regulators are now available globally from this company, which acquired RHPS B.V. in April 2010. These...
April 27, 2011
Emerson Process Management The Micro Motion Filling Mass Transmitter (photo) utilizes MVD (multivariable digital) technology and a Coriolis sensor, and is designed for processes that require high-speed, high-accuracy filling or dosing. Suitable for linear and...
April 27, 2011
The Stratus PTFE (polytetraflouroethylene) hose is lined completely with PTFE, and designed to minimize the chance for entrapment of material...
April 27, 2011
Georg FischerPiping Systems Developed for water supply applications where it is highly valued for its reliability and long service life, the new iJoint compression joint product mix (photo) includes couplings, reducers, tees, elbows, threaded...
April 27, 2011
Michael Smith Engineers The EFS Series pump in stainless steel (photo) is the latest addition to the Finish Thompson range of drum-emptying pumps. Suitable for pumping corrosive chemicals...
April 27, 2011
Assured Automation The FK Polypropylene Butterfly Valve Series offers superior strength and chemical resistance in highly corrosive environments. The special...
April 27, 2011
Charles Ross & Son The VersaMix has three agitators working in tandem, each driven separately. The equipment features a high-speed disperser that quickly draws powders into the liquid batch through a powerful...
April 14, 2011
Kobe Steel, Ltd. (Tokyo, Japan; announces that subsidiary Kobelco Compressors America, Inc. (KCA) is opening a new $20 million factory complex that will double its manufacturing capacity of compressor systems. KCA has also moved its headquarters to the new facility. KCA today (March 14, Pacific Daylight Time) is holding a grand opening of its new headquarters and factory. Today...
April 1, 2011
  The chemical process industries (CPI) are looking for ways to decrease and control costs, and mixing operations are not exempt from this belt tightening. But because mixing is vital to most chemical processes, it can’t be eliminated. As a result, processors are clamoring for mixing equipment that provides more functionality so they can perform more tasks with less equipment.  Figure 1...!_7745.html
Pages: « Previous  5 6 7 8 9 10 11 12 13 [14] 15 16 17 18 19 20 21 22 23 Next »

Get more from
Get email updates in your inbox


Subscribe to:
Chemical Engineering Magazine

Chemical Engineering Magazine and Archives

Plant Cost Index

Join us on... Twitter LinkedIn

LinkedIn Groups

Our LinkedIn group is now over 28,000 members strong!

  1. Join other CPI professionals from all over the globe and share best practices, expertise, concerns and more.
  2. Provide feedback to Chemical Engineering Editors

Current members represent Worley Parsons, DuPont, SABIC, Fluor, Air Products, LyondellBasell, Nalco, Dow Chemical, Dow Corning, BASF, Jacobs Engineering, ExxonMobil, Shell, Chevron and more.

Join Now

We also offer the following subgroup for more targeted discussions:

Search the Buyers' Guide

Plant Cost Index

Facts at Your Fingertips (archive)

Ask the Experts

Back Issues
To access this area, please log in or create an account.
Forgot your password?
Request it now.
Live chat by BoldChat