AccountGuest Edition My Account My Che.com Log In

Archives :: Processing & Handling :: Liquid, Gas and Air Handling

Displaying 281 - 300 of 809 stories.
March 28, 2011
Said to be the industry’s first intelligent, compressed-air-management program offering plant-wide analysis, realtime process control and pneumatic system design in a single integrated solution, the Norgren IQ program (photo) assesses both supply and demand of compressed air in...
http://www.chemengonline.com/processing_and_handling/liquid_gas_and_air_handling/compressors/Compressed-Air-Program-Cuts-Plant-Energy-Costs-Up-to-40-percent_6783.html
March 28, 2011
This vendor’s line of electrically-powered compressors delivers from 200 to 1,500 cfm at pressures up to 150 psi, producing clean, oil-free air suitable for high-purity applications. The units are also designed with sensitive environmental considerations in mind, with a sound-attenuating canopy...
http://www.chemengonline.com/processing_and_handling/liquid_gas_and_air_handling/compressors/Go-100-percent-Oil-Free-for-High-Purity-Needs_6784.html
March 28, 2011
ZD high pressure compressors are said to be the first in the world to offer 100% oil-free air with a Class 0 certification. Risk of any contamination by oil is effectively eliminated, thereby eliminating the need for subsequent product...
http://www.chemengonline.com/processing_and_handling/liquid_gas_and_air_handling/compressors/High-Pressure-Air-can-be-Oil-Free-and-Energy-Efficient-Too_6785.html
March 28, 2011
When compared to the traditional method of flaring propane and other liquefied petroleum gases (LPG), these mobile LPG evacuation units (photo, p. 55) offer a more-cost-efficient and safe alternative for removing residual gas from tanks that needed to be moved, repaired or replaced. The units feature the manufacturer’s LB...
http://www.chemengonline.com/processing_and_handling/liquid_gas_and_air_handling/compressors/Mobile-LPG-Evacuation-is-a-Safe-and-Efficient-Alternative-to-Flaring_6788.html
March 28, 2011
This manufacturer is launching the next level of its tried-and-tested system for monitoring reciprocating compressors, the new RecipCOM generation. In addition to continuously monitoring the status of all...
http://www.chemengonline.com/processing_and_handling/liquid_gas_and_air_handling/compressors/Track-compressor-health-with-this-new-monitor_6963.html
March 28, 2011
VMY ’56 is the official designation of the new generation of this firm’s refrigeration and process-gas compressors (photo). It is the synthesis of 35 years of experience with former VMY series and will replace the well-known series VMY ’46 in the medium term. Designed for all common refrigerants, the VMY compressors are...
http://www.chemengonline.com/processing_and_handling/liquid_gas_and_air_handling/compressors/A-new-generation-of-compressors-is-now-available_7038.html
March 28, 2011
Soundscreen panels and equipment enclosures provide thermal and acoustical control for blowers, fans, compressors, pumps and other bulk handling equipment. By enclosing the entire noise source, noise levels can be reduced to...
http://www.chemengonline.com/processing_and_handling/liquid_gas_and_air_handling/compressors/Enclose-the-entire-noise-source-to-meet-OSHA-noise-specs-_7393.html
March 28, 2011
KADW products are wall-mounted dessicant dryers with capacities from 7 to 50 ft3/min at 100 psig. They are capable of delivering consistent dew...
http://www.chemengonline.com/processing_and_handling/liquid_gas_and_air_handling/compressors/This-dessicant-dryer-is-designed-for-small-applications_7418.html
March 28, 2011
Specializing in energy-efficient systems for compressed air, this firm has developed systems that allow energy savings of the initial compressor-power consumption. As an example, a...
http://www.chemengonline.com/processing_and_handling/liquid_gas_and_air_handling/compressors/A-more-efficient-system-for-making-compressed-air_7428.html
March 28, 2011
Unveiled at Powtech 2008, the DB 166 C and DB 236 C (photo) are this firm’s latest generation of rotary blowers. System operators not only benefit from the significant energy and operational savings that these blowers offer, but are also able to take advantage of...
http://www.chemengonline.com/processing_and_handling/liquid_gas_and_air_handling/fans_and_blowers/Save-Energy-and-time-with-these-New-Rotary-Blowers_6767.html
March 28, 2011
The Qube blower package (photo), featuring the new Qx blower, is a quiet, low-cost, quick delivery solution for pneumatic conveying applications and...
http://www.chemengonline.com/processing_and_handling/liquid_gas_and_air_handling/fans_and_blowers/Drive-Pneumatic-Conveying-Applications-without-Blowing-Noise-Limits_6782.html
March 28, 2011
The IntelliView Line of aeration controls and control systems is designed to maximize efficiency of blowers and compressors in wastewater operations. A system can be purchased as a part of the vendor’s own aeration-blower system or integrated into third-party installations, including those that are preexisting. Models are...
http://www.chemengonline.com/processing_and_handling/liquid_gas_and_air_handling/fans_and_blowers/Maximize-Efficiency-of-Water-Treatment-Aeration_6786.html
March 28, 2011
For applications ranging from pneumatic conveying to aeration wastewater treatment, this manufacture offers a variety of pressure and vacuum blower packages (photo) that are ready to operate — shipped completely assembled and pre-piped. All packages feature a modular base/discharge silencer, V-Belt drive system, OSHA...
http://www.chemengonline.com/processing_and_handling/liquid_gas_and_air_handling/fans_and_blowers/These-Blower-Packages-are-Ready-to-Operate-on-Delivery_6787.html
March 28, 2011
To permit conveying and drying processes at high temperatures, this firm has developed a new series of high-temperature, side-channel blowers. Up to now...
http://www.chemengonline.com/processing_and_handling/liquid_gas_and_air_handling/fans_and_blowers/Blowers-for-high-temperature-conveying-and-drying_6814.html
March 28, 2011
Kaeser Compressors Vacuum systems in the Com-pak Plus blower series (photo) are positive displacement, tri-lobe blower packages that provide consistent, reliable vacuum. They feature...
http://www.chemengonline.com/processing_and_handling/liquid_gas_and_air_handling/fans_and_blowers/Vacuum-systems-for-areas-with-noise-or-space-constraints_7211.html
March 28, 2011
Kaeser Compressors Vacuum systems in the Com-pak Plus blower series (photo) are positive displacement, tri-lobe blower packages that provide consistent, reliable vacuum. They feature...
http://www.chemengonline.com/processing_and_handling/liquid_gas_and_air_handling/fans_and_blowers/Kaeser-Compressors_7265.html
March 28, 2011
AtlasCopco Compessors A prominent design feature of ZS Series blowers (photo) is their application of rotary screw compression technology. The rotary screw concept helps the blower to operate at efficiencies 35–40% higher than...
http://www.chemengonline.com/processing_and_handling/liquid_gas_and_air_handling/fans_and_blowers/This-blower-applies-rotary-screw-technology_7333.html
March 28, 2011
AirBand (photo), a portable, air-powered band saw, is ATEX approved for hazardous environments and EX zones and is ideal for use in grain silos, oil-and-gas facilities, utilities and underground mining where hazardous atmospheres may be...
http://www.chemengonline.com/processing_and_handling/liquid_gas_and_air_handling/piping_and_tubing/Cut-a-Wide-Variety-of-Materials-Quickly-and-Safely_6604.html
March 28, 2011
This firm’s welding system M200 power supply offers ease of use, portability, and 200-A capability — all at a weight of less than 50 lb. A...
http://www.chemengonline.com/processing_and_handling/liquid_gas_and_air_handling/piping_and_tubing/More-Welding-Power-from-this-Lightweight-Supply-Unit_6616.html
March 28, 2011
Lightweight, with a 1-hp motor and a 20-cfm rate of air consumption at 90 psi, the LRP 1503 AIR Boa Pipe Sander promises to be a comprehensive polishing solution for handrails, pipe and tubing. The device’s sanding arm...
http://www.chemengonline.com/processing_and_handling/liquid_gas_and_air_handling/piping_and_tubing/For-Polishing-Pipes-Handrails-and-Tubing-Try-this-Sander_6687.html
Pages: « Previous  6 7 8 9 10 11 12 13 14 [15] 16 17 18 19 20 21 22 23 24 Next »

Get more from Che.com
Get email updates in your inbox

 

Subscribe to:
Chemical Engineering Magazine

Chemical Engineering Magazine and Archives

Plant Cost Index

Join us on... Twitter LinkedIn

LinkedIn Groups

Our LinkedIn group is now over 28,000 members strong!

  1. Join other CPI professionals from all over the globe and share best practices, expertise, concerns and more.
  2. Provide feedback to Chemical Engineering Editors


Current members represent Worley Parsons, DuPont, SABIC, Fluor, Air Products, LyondellBasell, Nalco, Dow Chemical, Dow Corning, BASF, Jacobs Engineering, ExxonMobil, Shell, Chevron and more.

Join Now



We also offer the following subgroup for more targeted discussions:

Tools
Search the Buyers' Guide

Plant Cost Index

Facts at Your Fingertips (archive)

Ask the Experts

Back Issues
X
To access this area, please log in or create an account.
Username:
Password:
Forgot your password?
Request it now.
Processing...
Live chat by BoldChat