Archives :: Processing & Handling :: Liquid, Gas and Air Handling

Displaying 421 - 440 of 817 stories.
March 28, 2011
Michael Smith Engineers The combination of FMI rotary piston pump and Ismatec drives results in a range of pumps (photo) for very accurate and reliable dispensing, even when highly aggressive...
March 28, 2011
The SCP-6500 (available March 1, 2010) is designed to accommodate the transfer of alcohols, volatile hydrocarbons and flammable solvents. The pump features a lug with a grounding wire to allow...
March 28, 2011
The Atlas Syringe Pump XL is a volumetric dosing or sampling system consisting of two syringes, with up to six port valves. Each syringe can aspirate or...
March 28, 2011
Michael Smith Engineers The established range of Viking External Gear Pumps (photo) has been extended to include models that provide flows from as little as 0.2 L/min up to 760 L/min. Available from this firm, the...
March 28, 2011
GoatThroat Pumps Available in March, the SCP-6500 Pumps (photo) feature a lug with a grounding wire on the front of the pumps, and made with conductive...
March 28, 2011
Available in March, the SCP-6500 Pumps feature a lug with a grounding wire on the front of the pumps, and made with conductive plastic, these pumps...
March 28, 2011
Blackmer Pump HXL sliding vane pumps (photo) are designed specifically to rapidly and efficiently evacuate product from large liquid storage terminals, enabling fast product changes that react to market opportunities. The pumps can handle large volumes of a wide range of...
March 28, 2011
Cartex GSDN bi-directional gas-lubricated seals can be used to standardize new centrifugal pumps or recondition existing pumps that have conventional stuffing-box packings or liquid-lubricated mechanical seals. The characteristic design feature of the...
March 28, 2011
Michael Smith Engineers The established range of HNP positive displacement, internal-gear pumps has been expanded to include new, larger pumps and more drive...
March 28, 2011
The open impeller design of 811 ANSI Series pumps (photo) provides performance advantages during the pumping of demanding chemical process fluids. For...
March 28, 2011
Syrris This company’s Asia Syringe Pump (photo) is only 23 cm wide, yet is rated to 20 bar (300 psi). Constructed from highly chemically resistant...
March 28, 2011
Moyno The Moyno Mag Drive 500 Series pumps (photo) are said to be the first progessing-cavity, wobble-stator pumps to offer magnetic drives. They are designed to handle...
March 28, 2011
MV Products The PosiTrap Vacuum Inlet Trap product line (photo) is designed to protect pumps in small production and R&D applications up to 50 ft3/min. The filter elements are available in a variety of...
March 28, 2011
Pro-Flo X Hygienic Series pumps feature the company’s patent-pending Pro-Flo X Air Distribution System (ADS) and the Efficiency Management System (EMS). The ADS...
March 28, 2011
Dickow Pump The Series NMWR seal-less centrifugal pumps (photo) have magnetic couplings and no shaft duct to the atmosphere, and are available with maximum capacity to...
March 28, 2011
The Mouvex SLC-Series eccentric-disk pumps are designed to self-compensate for mechanical wear and maintain consistent flow over time. With seal-less construction, low shear...
March 28, 2011
Pulsafeeder The PulsaPro 900, a hydraulic diaphragm process and metering pump (photo), is designed for a broad array of chemical, petrochemical and oil-and-gas applications. It can handle...
March 28, 2011
Recently launched, the PumpMeter is composed of pressure sensors and an analyzing and display unit, which is attached to the pump. The system measures suction pressure, discharge pressure, differential...
Pages: « Previous  13 14 15 16 17 18 19 20 21 [22] 23 24 25 26 27 28 29 30 31 Next »

Get more from
Get email updates in your inbox


Subscribe to:
Chemical Engineering Magazine

Chemical Engineering Magazine and Archives

Plant Cost Index

Join us on... Twitter LinkedIn

LinkedIn Groups

Our LinkedIn group is now over 28,000 members strong!

  1. Join other CPI professionals from all over the globe and share best practices, expertise, concerns and more.
  2. Provide feedback to Chemical Engineering Editors

Current members represent Worley Parsons, DuPont, SABIC, Fluor, Air Products, LyondellBasell, Nalco, Dow Chemical, Dow Corning, BASF, Jacobs Engineering, ExxonMobil, Shell, Chevron and more.

Join Now

We also offer the following subgroup for more targeted discussions:

Search the Buyers' Guide

Plant Cost Index

Facts at Your Fingertips (archive)

Ask the Experts

Back Issues
To access this area, please log in or create an account.
Forgot your password?
Request it now.
Live chat by BoldChat