Archives :: Processing & Handling :: Liquid, Gas and Air Handling :: Mixing

Displaying 21 - 40 of 101 stories.
December 1, 2011
The RealShear line of sensors represent the first commercially available system for measuring wall shear stress in applications such as industrial mixing, extrusion and pipelines, according to this company. The inline sensors provide continuous, realtime data measurement rates of up to...
December 1, 2011
A new chopper system has been developed for demanding applications where products tend to bind or harden when adding reactants. The chopper is placed tangentially and at a...
November 1, 2011
d fsbgsd High-speed dispersers from this company are suitable for most straightforward powder wet-out applications with fluid viscosities up to 50,000 cP. The units, which...
September 1, 2011
High-shear mixers from this company are ideal for challenging mixing operations, such as dispersing gums and thickeners to disintegrate any...
August 1, 2011
The mixing-drying reactor can process substances of widely differing consistencies. The machine, which dries in a fine vacuum, is also very flexible with regard to the filling level. It is suitable for both homogenization of a mixture and also for more intensive...
August 1, 2011
A new Gas Addition Module has been introduced for this company’s FlowSys and other continuous flow reactors. The new module enables fast, controllable pre-saturation of liquid reagents with a wide range of gases and so promotes efficient gas-dependent...
August 1, 2011
The CSF Steam Water Mixer reliably and safely delivers hot water at the required temperature for cleaning or wash-down applications, especially those in the food and...
July 1, 2011
Gas-liquid reactors in the chemical process industries (CPI) have increasingly been designed to handle larger manufacturing scales. Since gas-liquid reactors can represent substantial capital and operating costs for the user, optimizing mixing and maximizing productivity are critical. The need for efficiency at larger scales places more importance on understanding the physical phenomena of mixing and more...
April 27, 2011
Charles Ross & Son The VersaMix has three agitators working in tandem, each driven separately. The equipment features a high-speed disperser that quickly draws powders into the liquid batch through a powerful...
April 1, 2011
  The chemical process industries (CPI) are looking for ways to decrease and control costs, and mixing operations are not exempt from this belt tightening. But because mixing is vital to most chemical processes, it can’t be eliminated. As a result, processors are clamoring for mixing equipment that provides more functionality so they can perform more tasks with less equipment.  Figure 1...!_7745.html
March 28, 2011
This firm has recently launched the RAM 5 (photo), a production-scale mixer based on the proprietary ResonantAcoustic Mixing (RAM) technology ( CE, December 2007, p. 13). RAM technology uses...
March 28, 2011
The BM-2M connects directly to a gas cylinder and mixes two gases in any ratio with inlet pressures up to 300 bar achieving a...
March 28, 2011
Viscous reaction mixtures often require more powerful stirring than can be achieved with magnetic stirrers. The Vortex stirrer system (photo) converts a single overhead stirrer into a...
March 28, 2011
The Kinematica Polytron PT 10/35 GT homogenizer (photo) is the successor to the Polytron PT 10/35, and is ideal for applications between 0.1 and 3,000 mL — creating a...
March 28, 2011
The patent-pending Batchmixer was developed to mix active substances in a self-contained system. This system allows contamination-free and product-friendly...
March 28, 2011
The PowerMix (photo) includes two separate agitation systems within one mixer. A planetary blade revolves in combination with a separate high-speed dispersion blade. Both revolve on their own axis as well as on a common axis, and the speed of each can be...
March 28, 2011
The PowerMix includes two separate agitation systems within one mixer. A planetary blade revolves in combination with a separate high-speed dispersion blade. Both revolve on their own axis as well as on a common axis, and the speed of each can be varied...
March 28, 2011
The magnetic agitators of the BMR Series (photo) meet all requirements that exist today for GMP-compliant production. The open design of the magnetic impeller permits cleaning in place (CIP), as demonstrated by independent studies carried...
March 28, 2011
The PB Series pharmaceutical mixers (photo) feature a lightweight frame motor with a right-angle drive, 316 stainless-steel wetted parts, dry...
March 28, 2011
The UniFirst 4040 mixer drive (photo) is designed to provide trouble-free operation while lowering maintenance costs. Routine maintenance is simplified with fewer parts, easy accessibility and standard components. Additional features...
Pages: « Previous  1 [2] 3 4 5 6 Next »

Get more from
Get email updates in your inbox


Subscribe to:
Chemical Engineering Magazine

Chemical Engineering Magazine and Archives

Plant Cost Index

Join us on... Twitter LinkedIn

LinkedIn Groups

Our LinkedIn group is now over 33,000 members strong!

  1. Join other CPI professionals from all over the globe and share best practices, expertise, concerns and more.
  2. Provide feedback to Chemical Engineering Editors

Current members represent Worley Parsons, DuPont, SABIC, Fluor, Air Products, LyondellBasell, Nalco, Dow Chemical, Dow Corning, BASF, Jacobs Engineering, ExxonMobil, Shell, Chevron and more.

Join Now

We also offer the following subgroup for more targeted discussions:

Search the Buyers' Guide

Plant Cost Index

Facts at Your Fingertips (archive)

Ask the Experts

Back Issues
To access this area, please log in or create an account.
Forgot your password?
Request it now.
Live chat by BoldChat