Archives :: Processing & Handling :: Solids Handling

Displaying 41 - 60 of 329 stories.
December 1, 2012
Super Strength Rare Earth Sight Glass Magnets are part of this company’s ProGrade product line of magnetic separators. The ProGrade Super Strength magnets are designed to remove fine and weakly magnetic ferrous...
http://www.chemengonline.com/processing_and_handling/solids_handling/packaging_and_transporting/Separate-ferrous-contamination-with-these-magnets_10015.html
December 1, 2012
By integrating two different light sources into a single instrument, this company unites the functionality of both a near infrared and blue particle sizers. The Multiwavelength LUMSizer 65x is designed for the fast characterization of manifold...
http://www.chemengonline.com/processing_and_handling/solids_handling/testing_and_modeling/Nanoparticle-characterization-with-a-single-instrument_10009.html
December 1, 2012
This company’s MSI-4260 and MSI 3460 crane scale models have been upgraded to allow its use with a new remote display. Compatibility with the remote display product offers an added...
http://www.chemengonline.com/processing_and_handling/solids_handling/weighing/These-upgraded-scales-have-a-remote-display_9998.html
November 1, 2012
A new range of this company’s Lynflow Intermediate Bulk Containers (IBCs) have been designed specifically for the storage and transportation of difficult-flowing bulk materials. The polypropylene-molded IBCs are fully interchangeable with...
http://www.chemengonline.com/processing_and_handling/solids_handling/bins_silos_and_storage/These-IBCs-dont-need-vibrating-discharge-stations_9937.html
November 1, 2012
For most solids-processing operations in the chemical process industries (CPI), particle-size reduction and screening (classification) to achieve the desired particle-size are required, since processes rarely produce the desired size directly. When designing processes, selecting equipment and looking for ways to increase efficiency, CPI engineers must understand the size-reduction behavior of the solid...
http://www.chemengonline.com/processing_and_handling/solids_handling/milling_grinding_and_screening/Particle-size-reduction_9900.html
November 1, 2012
The Russell Compact Sieve is said to offer considerable benefits over conventional spring-mounted systems. In addition to quieter operation [typically less than 70 dB(A)], the screener is able to transmit significantly...
http://www.chemengonline.com/processing_and_handling/solids_handling/milling_grinding_and_screening/Enhanced-screening-now-available-in-stainless-steel_9929.html
November 1, 2012
The Model SCC-15-SS Screen Classifying Cutter is a high-torque, low-speed unit that reduces hard materials and friable products into controlled particle sizes. Its proprietary rotor design features cutter bits that are attached to a helical array of staggered holders called “interconnected...
http://www.chemengonline.com/processing_and_handling/solids_handling/milling_grinding_and_screening/This-classifying-cutter-has-a-proprietary-rotor-design_9940.html
November 1, 2012
The new Zetasizer Nano ZSP is a high-specification dynamic light-scattering system that delivers unique protein-characterization capabilities in a single, easy-to-use instrument. The instrument enables...
http://www.chemengonline.com/processing_and_handling/solids_handling/testing_and_modeling/Characterize-proteins-with-this-analyzer_9915.html
October 1, 2012
Blending and segregation are two opposite and competing processes in solids handling that ideally fit the expression “two sides of the same coin.” But, if you think about it, coins have three sides and sampling completes the idiomatic expression perfectly. Blending is a necessary and essential process operation widely employed in many industries and materials, from nano-scale powders to...
http://www.chemengonline.com/processing_and_handling/solids_handling/blending/Blending-Sampling-and-Segregation_9786.html
October 1, 2012
With a production flowrate of up to 600 kg/h, the Sphero 50 underwater pelletizing system can be applied in testing plants and smaller production plants with pelletizing options for virgin polymers, masterbatches...
http://www.chemengonline.com/processing_and_handling/solids_handling/coating_forming_and_agglomeration/A-pelletizing-system-for-smaller-scale-production_9810.html
October 1, 2012
The P-Series Venturi Loaders are designed specifically for conveying powders in sanitary food, pharmaceutical and chemical applications. The P-Series products can be used for loading hoppers, as...
http://www.chemengonline.com/processing_and_handling/solids_handling/feeding_and_conveying/This-conveyor-is-designed-for-sanitary-duty_9820.html
October 1, 2012
The Material Master bulk bag and drum discharger features the heavy-duty Flo-Master breaker bar massaging system for bulk bags that promotes product discharge. These units are custom-designed according to the specific...
http://www.chemengonline.com/processing_and_handling/solids_handling/feeding_and_conveying/This-solids-discharger-has-a-heavy-duty-massaging-system_9824.html
October 1, 2012
The new 36-in. Orbital Bottom Side Feed Mill is designed to process 3,000–6,000-lb/h capacities, and combines design features normally found only in smaller mills, says the manufacturer. The combination of the bottom side feed and orbital-mill design...
http://www.chemengonline.com/processing_and_handling/solids_handling/milling_grinding_and_screening/This-large-capacity-mill-has-design-features-of-smaller-ones_9788.html
October 1, 2012
Among the products being exhibited at the Fakuma Plastics Recycling Trade Show (Friedrichshafen, Germany; October 16–20) is the Granulator...
http://www.chemengonline.com/processing_and_handling/solids_handling/milling_grinding_and_screening/Granulate-and-recycle-plastics-waste-for-less-energy_9791.html
October 1, 2012
The Auto-tapper automatically frees off-specification pellets from the screening decks of pellet classifiers. The Auto-tapper induces a small resonance through the perforated classifier deck that coordinates with the linear vibrating...
http://www.chemengonline.com/processing_and_handling/solids_handling/milling_grinding_and_screening/This-device-frees-off-spec-pellets-from-screening-decks_9826.html
September 1, 2012
The new Rotoform 4G system is the latest generation of this well-known solution for granulating a wide range of chemical melts, including sulfur, waxes, resins and agrochemicals. The Rotoform family now numbers ten different models, each meeting the needs of a...
http://www.chemengonline.com/processing_and_handling/solids_handling/coating_forming_and_agglomeration/This-new-pastillation-machine-requires-less-maintenance_9661.html
September 1, 2012
This new Mobile Half-Frame Bulk Bag Unloader integrates a multipurpose hopper with a flexible screw conveyor to create a unit that can improve plant efficiency by easy repositioning to accommodate alternative...
http://www.chemengonline.com/processing_and_handling/solids_handling/feeding_and_conveying/Bag-unloading-is-more-flexible-with-this-system_9676.html
September 1, 2012
This company has equipped several plants for the production of blown film with continuous screen changers of the type K-SWE. The screen changers were equipped with a separate control to...
http://www.chemengonline.com/processing_and_handling/solids_handling/milling_grinding_and_screening/Boost-productivity-with-this-continuous-filter-screen-changer_9667.html
August 1, 2012
The earliest application of the fundamental concepts of fluidization dates back to 16th century when a German scientist (Georgius Agricola) described a process to upgrade ores. However, it was not until the 1930s, with the development of the Winkler coal-gasification process, that commercial use of fluidized beds on an industrial scale was recognized. The need for gasoline during the World War II...
http://www.chemengonline.com/processing_and_handling/solids_handling/A-Primer-on-Gas-Solids-Fluidization_9573.html
July 1, 2012
Automated systems for batch weighing can improve overall product quality by raising the accuracy and consistency of the mixture compared to what can be achieved with the manual addition of pre-weighed bags. Automated batch-weighing systems integrate load cells with connections, valves, relay hardware and process control software. These systems control one or more pieces of feed equipment that deliver...
http://www.chemengonline.com/processing_and_handling/solids_handling/weighing/Automated-Weigh-Batching-Systems_9455.html
Pages: « Previous  1 2 [3] 4 5 6 7 8 9 10 11 12 Next »

Get more from ChemEngOnline.com
Get email updates in your inbox

 

Subscribe to:
Chemical Engineering Magazine

Chemical Engineering Magazine and Archives

Plant Cost Index

Join us on... Twitter LinkedIn

LinkedIn Groups

Our LinkedIn group is now over 28,000 members strong!

  1. Join other CPI professionals from all over the globe and share best practices, expertise, concerns and more.
  2. Provide feedback to Chemical Engineering Editors


Current members represent Worley Parsons, DuPont, SABIC, Fluor, Air Products, LyondellBasell, Nalco, Dow Chemical, Dow Corning, BASF, Jacobs Engineering, ExxonMobil, Shell, Chevron and more.

Join Now



We also offer the following subgroup for more targeted discussions:

Tools
Search the Buyers' Guide

Plant Cost Index

Facts at Your Fingertips (archive)

Ask the Experts

Back Issues
X
To access this area, please log in or create an account.
Username:
Password:
Forgot your password?
Request it now.
Processing...
Live chat by BoldChat