Archives :: Processing & Handling :: Solids Handling :: Feeding and Conveying

Displaying 21 - 40 of 110 stories.
November 1, 2011
The Gladiator Acoustic Switch series is designed for continuous operation in applications in which detecting blocked feed chutes is important. The device has two acoustic wave transducers that pulse and receive each other’s...
November 1, 2011
Designed specifically for handling bulk materials known to generate combustible dust, this agitator-hopper is equipped with explosion protection and control features, including an...
October 1, 2011
Designed specifically for rugged applications and processing of harsh and abrasive materials, the CI Series of rotary feeder valves provides bulk-material processing operations with continuous performance, reduced maintenance and...
September 1, 2011
Dilute-phase conveying systems generally use centrifugal fans and positive displacement blowers for supplying conveying air to the conveying system. However, for some conveying systems, compressed air from a central compressor station is also used. The two important criteria required for pneumatic conveying are air flow and air delivery pressure. Different air movers have different characteristics in the...
September 1, 2011
  Over 1,000 exhibitors from all over the world will fill six halls at the Nuremberg Fairground for Powtech/TechnoPharm 2011 (October 11–13). Held every 18 months, Powtech — the International Trade Fair for Mechanical Processing Technologies and Instrumentation — is the meeting place for representatives of many sectors of the chemical process industries (CPI), including chemicals and...
August 1, 2011
The MTS hydraulic Lift & Seal System safely inverts drums of dusty powders, and meters the contents into an existing vessel. The system seals the drum to a dust-tight pour cone with...
June 27, 2011
  The MTS hydraulic Lift & Seal System safely inverts drums of dusty powders, and meters the contents into an existing vessel. The system seals the drum to a dust-tight pour cone...
March 28, 2011
The new, third-generation of the Kokeisl "automatic shovel" guarantees the regulated discharge of even sluggish and bridge-prone bilk materials from...
March 28, 2011
In order to provide customers with accurate answers to this question, this firm is now offering tests at its new TestCenter in Darmstadt, Germany. Tests in the four laboratories can be run...
March 28, 2011
The 4B Watchdog Elite (photo) uses non-contacting, magnetic sensors to monitor belt speed and belt alignment at the head, boot or both. Additional sensors monitor bearing temperature, head pulley...
March 28, 2011
The Premier Pneumatics 2410 powder and pellet vacuum receiver with a new Series 4 controller will be on display at this firm’s booth. The 2410 is designed to handle powder, pellet, regrind or granular materials in the chemical...
March 28, 2011
This firm will exhibit a filling station equipped with Sartorius weighing technology, and a feeding installation with Systec weighing technology...
March 28, 2011
Since 1979, this firm has been Canada’s leading manufacturer of couplings, tube and pipe bends, fittings, diverter valves, slide gates, cyclones...
March 28, 2011
Material to be size reduced no longer needs to be gravity fed into the grinding chamber, but is evenly and horizontally fed into the rotor with the help of feeding screws. This way...
March 28, 2011
This firm’s latest feed system, PureFeed DP, is especially suitable for continuous, gravimetric feeding of tiny volumes of powder with manual refills. The technology used by the...
March 28, 2011
The online measuring system Micro-Moist LB 456 is able to measure moisture in a non-contacting way both on conveyor belts and in pipelines. The system uses microwaves of...
March 28, 2011
This firm has launched a 1.5-in. version of its Type 350/800 Power Pulse valves. Specifically designed for the dust collector market, the valves feature a patented piston design that...
March 28, 2011
The latest generation of Graviblend now comes with a fully integrated material conveying system. This means that there are fewer interfaces, it is easier to use and material changes require less time —...
March 28, 2011
This new series of a.c.-operated High-speed Feeders is designed specifically for exceptionally high-speed feeding of light, bulky materials. These feeders are said...
Pages: « Previous  1 [2] 3 4 5 6 Next »

Get more from
Get email updates in your inbox


Subscribe to:
Chemical Engineering Magazine

Chemical Engineering Magazine and Archives

Plant Cost Index

Join us on... Twitter LinkedIn

LinkedIn Groups

Our LinkedIn group is now over 33,000 members strong!

  1. Join other CPI professionals from all over the globe and share best practices, expertise, concerns and more.
  2. Provide feedback to Chemical Engineering Editors

Current members represent Worley Parsons, DuPont, SABIC, Fluor, Air Products, LyondellBasell, Nalco, Dow Chemical, Dow Corning, BASF, Jacobs Engineering, ExxonMobil, Shell, Chevron and more.

Join Now

We also offer the following subgroup for more targeted discussions:

Search the Buyers' Guide

Plant Cost Index

Facts at Your Fingertips (archive)

Ask the Experts

Back Issues
To access this area, please log in or create an account.
Forgot your password?
Request it now.
Live chat by BoldChat