Archives :: Software, Automation & Control

Displaying 141 - 160 of 1126 stories.
December 1, 2012
While almost all chemical processors employ simulation software during the early design stages of new plants or new lines, simulation vendors say best-in-class facilities take the powerful tools further and use them for improving operations and profitability. And, across the board, software providers are working hard to make their most recent applications more user-friendly and accessible, so that more...
November 1, 2012
System 800xA now features Analyzer Device Integration Connect (ADIc), a device interface that allows System 800xA to integrate with analyzers and chemiometric predictors. ADIc was developed based on the OPC...
November 1, 2012
Last month, this company launched its first fieldbus gateway and block I/O modules that communicate with Profinet IO, Modbus TCP or Ethernet/IP. The multiprotocol devices can be operated automatically in each of the...
November 1, 2012
SciFinder, a digital database and analysis technology for chemistry-related research, has been enhanced to improve the evaluation of reaction answer sets and to allow easier collaboration with other SciFinder users...
November 1, 2012
This flow monitor now has FM and FMc approvals Fluid Components International The Model FS10A Analyzer Flow Switch and Monitor recently received FM and FMc (Canadian) approvals. The approvals signify that the FS10A is suitable for continuous-flow verification applications that support process-analyzer sampling systems operating in hazardous plant areas in the U.S., Canada and elsewhere. The FS10A’s...
November 1, 2012
The Module PA4550 for the Dynamic Foam Analyzer DFA100 measures the liquid content of foam via its conductivity in parallel at seven different heights of the foam column, so that drainage is...
November 1, 2012
The new Zetasizer Nano ZSP is a high-specification dynamic light-scattering system that delivers unique protein-characterization capabilities in a single, easy-to-use instrument. The instrument enables...
November 1, 2012
The RM200QC colorimeter is a handheld device for recording and communicating color differences of textiles, coatings, chemicals, plastic molding and other products with laboratory reference standards. The device...
November 1, 2012
The VersaSpec MB2 and MB3 systems are two- and three-stage molecular-beam inlet, quadrupole mass-spectrometer systems designed for analysis of neutrals or ions across the pressure range from 2...
November 1, 2012
This company has introduced a new remote support and optimization capability for its CM710e range of Ethernet-enabled, online NIR (near infrared) gages. These gages are used for...
November 1, 2012
The XTP601 oxygen sensor is ideal for accurately monitoring the O2 levels in a reactor, and enabling the N2-purge to be shut down when the O2 level is safe. Based on...
November 1, 2012
The compact Flowsic500 ultrasonic gas meter is specially designed for custody transfer natural-gas flow readings, allowing highly precise calculations. Its compact design does...
November 1, 2012
The Dutch Metrological Institute NMi has approved the Rosemount Raptor tank-gauging system for custody transfer accuracy, and the German DIBt/TÜV Nord has tested and approved the system in accordance with the rules of overfill prevention. The Raptor is...
November 1, 2012
For every chemical process there are different pressure measurement requirements. Some demand devices that are compatible with a unique chemistry, others require pressure instrumentation that won’t pose a risk to workers or processes and many call for instruments that can handle a wide temperature range. However, throughout the chemical process industries (CPI), there are a few items on...
November 1, 2012
The DG25 digital pressure gauge provides a five-digit LCD readout in ranges up to 25,000 psi. Available in accuracies of 0.5% and 0.25% of full...
November 1, 2012
With its air2guide product range for air-handling technology, this company also offers measuring solutions for cleanrooms. For positive and negative pressure control...
November 1, 2012
The PAX2C PID (proportional integral derivative) controller is specifically designed for industrial automation in the process- and temperature-control markets. The product is the latest addition to this company’s...
November 1, 2012
The Sirus 2RR24 current monitoring relay for IO-Link monitors motors over the complete torque curve and is also dimensioned for current monitoring of the overall plant. The device detects...
November 1, 2012
Fast/Tools R9.05 is the latest release of this company’s Web-based, realtime management and visualization software. The Fast/Tools Scada suite delivers a comprehensive solution that brings together the company’s process-management...
Pages: « Previous  1 2 3 4 5 6 7 [8] 9 10 11 12 13 14 15 16 17 Next »

Get more from
Get email updates in your inbox


Subscribe to:
Chemical Engineering Magazine

Chemical Engineering Magazine and Archives

Plant Cost Index

Join us on... Twitter LinkedIn

LinkedIn Groups

Our LinkedIn group is now over 30,000 members strong!

  1. Join other CPI professionals from all over the globe and share best practices, expertise, concerns and more.
  2. Provide feedback to Chemical Engineering Editors

Current members represent Worley Parsons, DuPont, SABIC, Fluor, Air Products, LyondellBasell, Nalco, Dow Chemical, Dow Corning, BASF, Jacobs Engineering, ExxonMobil, Shell, Chevron and more.

Join Now

We also offer the following subgroup for more targeted discussions:

Search the Buyers' Guide

Plant Cost Index

Facts at Your Fingertips (archive)

Ask the Experts

Back Issues
To access this area, please log in or create an account.
Forgot your password?
Request it now.
Live chat by BoldChat