Archives :: Software, Automation & Control :: Instrumentation, Automation & Control :: Analyzers, Gages & Indicators

Displaying 21 - 40 of 320 stories.
April 1, 2013
Anton Paar USA The MCR 702 rheometer features this company’s modular TwinDrive technology, and is said to be the only instrument capable of handling all rheological applications. The device has two synchronous EC (electrically commutated) motor units — one...
March 1, 2013
Nemesis is said to be the only analyzer of its kind — the first fully portable system to test for tampering in fuel. The device provides...
March 1, 2013
The Cryocooler is a sample-holding accessory to this company’s gas-sorption analyzer, which is used to measure surface area and pore size of industrially useful porous materials and powders, and to investigate sorption capacity of state-of-the-art materials, such as carbons...
February 1, 2013
To best meet specific application needs, the DT722 relative humidity (RH) and temperature transmitter is available in digital (DT722) and analog (DT722-X18) models. The digital version gives high...
February 1, 2013
By using electrothermal vaporization (ETV) for sample introduction, this company has greatly improved the sensitivity of its Arcos ICP-OES spectrometer for material-analysis applications. Trials verify that detection limits can be improved by an order of...
January 1, 2013
The FBRM (Focused Beam Reflectance Measurement) is used for tracking the rate and degree of change to particle structures and droplets at full process concentration. FBRM G600L quickly...
January 1, 2013
The design of the new DA 7250 near infrared (NIR) instrument incorporates non-moving optical components, internal temperature stabilization, a static hard drive encased in an IP65-rated housing. The DA 7250...
January 1, 2013
The new Metso Pulp Analyzer provides the first online measurement of micro-scale details of fiber properties, thereby giving pulp and papermakers a tool to help predict how fiber...
December 1, 2012
The TX-3000 pH/mV Transmitter monitors changes in process fluids, displaying pH or oxidation-reduction potential (ORP; measured in mV), and temperatures for more accurate process control in water, chemical, electronics, food production...
December 1, 2012
The PCMini52 relative humidity (RH) and temperature probe utilizes a thin-film capacitive sensor, which is designed for extremely fast response and long-term stability for repeatable...
November 1, 2012
This flow monitor now has FM and FMc approvals Fluid Components International The Model FS10A Analyzer Flow Switch and Monitor recently received FM and FMc (Canadian) approvals. The approvals signify that the FS10A is suitable for continuous-flow verification applications that support process-analyzer sampling systems operating in hazardous plant areas in the U.S., Canada and elsewhere. The FS10A’s...
November 1, 2012
The Module PA4550 for the Dynamic Foam Analyzer DFA100 measures the liquid content of foam via its conductivity in parallel at seven different heights of the foam column, so that drainage is...
November 1, 2012
System 800xA now features Analyzer Device Integration Connect (ADIc), a device interface that allows System 800xA to integrate with analyzers and chemiometric predictors. ADIc was developed based on the OPC...
November 1, 2012
The new Zetasizer Nano ZSP is a high-specification dynamic light-scattering system that delivers unique protein-characterization capabilities in a single, easy-to-use instrument. The instrument enables...
November 1, 2012
The RM200QC colorimeter is a handheld device for recording and communicating color differences of textiles, coatings, chemicals, plastic molding and other products with laboratory reference standards. The device...
November 1, 2012
The VersaSpec MB2 and MB3 systems are two- and three-stage molecular-beam inlet, quadrupole mass-spectrometer systems designed for analysis of neutrals or ions across the pressure range from 2...
November 1, 2012
This company has introduced a new remote support and optimization capability for its CM710e range of Ethernet-enabled, online NIR (near infrared) gages. These gages are used for...
November 1, 2012
The XTP601 oxygen sensor is ideal for accurately monitoring the O2 levels in a reactor, and enabling the N2-purge to be shut down when the O2 level is safe. Based on...
October 1, 2012
Manufacturer’s warranty period extended to two years Trolex This manufacturer of gas detection and environmental monitoring systems has extended its warranty period to two years, providing additional coverage for all of its equipment. The company also offers a service contract specifically tailored to requirements that cover the maintenance of its products (photo). When customers call for product...
Pages: « Previous  1 [2] 3 4 5 6 7 8 9 10 11 Next »

Get more from
Get email updates in your inbox


Subscribe to:
Chemical Engineering Magazine

Chemical Engineering Magazine and Archives

Plant Cost Index

Join us on... Twitter LinkedIn

LinkedIn Groups

Our LinkedIn group is now over 33,000 members strong!

  1. Join other CPI professionals from all over the globe and share best practices, expertise, concerns and more.
  2. Provide feedback to Chemical Engineering Editors

Current members represent Worley Parsons, DuPont, SABIC, Fluor, Air Products, LyondellBasell, Nalco, Dow Chemical, Dow Corning, BASF, Jacobs Engineering, ExxonMobil, Shell, Chevron and more.

Join Now

We also offer the following subgroup for more targeted discussions:

Search the Buyers' Guide

Plant Cost Index

Facts at Your Fingertips (archive)

Ask the Experts

Back Issues
To access this area, please log in or create an account.
Forgot your password?
Request it now.
Live chat by BoldChat