AccountGuest Edition My Account My Log In

Archives :: Software, Automation & Control :: Instrumentation, Automation & Control :: Flow Measurement & Control

Displaying 21 - 40 of 146 stories.
April 1, 2012
The new VLM10 inline vortex flowmeter for mass, volumetric and energy-flow measurement on steam, liquid and gas applications is available in sizes 1 to 12 in. The device combines an inline vortex meter, a...
December 1, 2011
The DN-EM Energy Flow Monitor provides a low cost solution to applications in energy transfer and in heating and cooling systems, such as heating and cooling loops, heat recovery applications, condensate recovery applications, efficiency measurement and verification systems, solar or...
December 1, 2011
This company has expanded its suite of Smart Meter Verification (SMV) technology products to include Rosemount magnetic flowmeters. SMV delivers complete, online verification of device...
November 1, 2011
The new Type 8022 flow transmitter and pulse divider combines the functions of the company’s 8021 pulse divider and its 8023 flow transmitter into a single device. This electronic module can display and further process the flow measured by the sensors of type...
November 1, 2011
Last month, this company introduced three new or improved transit-time ultrasonic flowmeters. The new Innova-Sonic 203 has been optimized for good performance and lower cost, without the feature-rich option for dedicated clamp-on ultrasonic...
October 1, 2011
The redesigned Bright multifunctional local readout-and-control (R/C) unit now features a 1.8-in. color TFT screen with wide-angle visibility. Some cost options are now included as standard, such as the mounting...
October 1, 2011
The TM Series flowmeter is a plastic digital flowmeter with a 1/2-in. digital display, which shows rate plus two totals; one total is...
September 1, 2011
To handle corrosive applications and harsh environments, this company now offers its Micro Motion Elite High Capacity Coriolis meter in Super Duplex material. The Super Duplex...
September 1, 2011
With the new SE56 Basic, this company is offering users an attractive alternative for flow electronics of full-bore magmeters, especially in the water-treatment sector. In many standard applications...
August 1, 2011
LiquiSonic consists of one or more sensors and a controller. The contactless measuring method is based on the sonic velocity measurement for a precise and fast data acquisition. The...
July 1, 2011
The Innova-Sonic 210i transit-time flowmeter features a powerful ultrasonic pulse with improved digital signal processing, which enables the unit to use one set of transducers over a wide range of pipe sizes. The 210i also includes...
July 1, 2011
The new Sitrans FCS200 flowmeter sensor has a compact design, which allows the use of small and efficient dispensers. The high-capacity, with a flowrate up to 500 kg/min...
July 1, 2011
The Series DFM flowmeters are used in heating, air-conditioning and refrigeration systems as well as solar and geothermal applications to monitor the flow of heating...
July 1, 2011
The ST100 Series is the first thermal mass flowmeter to meet new Foundation Fieldbus (FF) H1 standards. Besides FF H1, the flowmeter can quickly be configured to other protocols, including Profibus PA and Modbus, thanks to a plug-in bus communication card. The device also supports analog HART version 7. Designed for monitoring gas flow in various applications...
July 1, 2011
This company has attained CSA approval for the use of its mass flowmeters, mass-flow controllers and pressure equipment in Class 1 Div. 2 hazardous environments...
June 1, 2011
One of the most important measurements in the chemical process industries (CPI) is rate of flow. Flowrates can be important to measure, and in fact can be critical to measure, throughout a process — from dosing components into a reactor to material transfers in-between process steps, to discharging products at the end. Flow metering technologies fall into four classifications: velocity, inferential...
May 1, 2011
The large-diameter Optimass 2000 Coriolis mass flowmeter is capable of measuring bulk fluid transfer to accuracies of 0.1%, and can handle mass flowrates of...
April 1, 2011
Storing solid materials in hoppers, bins and silos is ubiquitous in the chemical process industries (CPI), as are challenges associated with dispensing them. In many cases, using vessels with steep cones and smooth walls is enough to provide reliable flow. However, it is not always feasible to design and install hoppers with the optimal geometry, and many solids have difficult or variable flow properties...
March 28, 2011
The mini CORI-Flow Series (photo) is a compact and cost-effective Coriolis mass flowmeter and controller for accurate measurement and control of very low flowrates from 100 mg/h up to 30...
Pages: « Previous  1 [2] 3 4 5 6 7 8 Next »

Get more from
Get email updates in your inbox


Subscribe to:
Chemical Engineering Magazine

Chemical Engineering Magazine and Archives

Plant Cost Index

Join us on... Twitter LinkedIn

LinkedIn Groups

Our LinkedIn group is now over 28,000 members strong!

  1. Join other CPI professionals from all over the globe and share best practices, expertise, concerns and more.
  2. Provide feedback to Chemical Engineering Editors

Current members represent Worley Parsons, DuPont, SABIC, Fluor, Air Products, LyondellBasell, Nalco, Dow Chemical, Dow Corning, BASF, Jacobs Engineering, ExxonMobil, Shell, Chevron and more.

Join Now

We also offer the following subgroup for more targeted discussions:

Search the Buyers' Guide

Plant Cost Index

Facts at Your Fingertips (archive)

Ask the Experts

Back Issues
To access this area, please log in or create an account.
Forgot your password?
Request it now.
Live chat by BoldChat