Archives :: Software, Automation & Control :: Instrumentation, Automation & Control :: Temperature Measurement & Control

Displaying 1 - 20 of 67 stories.
October 1, 2014
Yokogawa With a 1-m spatial resolution, The DTSX 3000 Distributed Temperature Sensor can measure the temperature along fiber-optic cables up to 50 km in length, eight times the...
April 1, 2014
A dual-sensor temperature transmitter with HART protocols Invensys Foxboro The RTT80 temperature transmitter (photo) offers signal reliability, longterm stability, high precision and advanced diagnostics. The RTT80 is a mid-tier, two-wire temperature transmitter available with HART (and soon to be released Foundation Fieldbus) protocols, dual-sensor inputs, universal housing, diagnostics, alarms...
January 1, 2014
Rising temperatures and rapid or excessive heat buildup are useful markers for determining the operational health of many types of machinery and components that are used in a wide array of industrial and manufacturing settings. The types of mechanical and electrical systems for which temperature increases often signal problems include (but are not limited to): rotating machinery, such as motors, turbines...
July 1, 2013
The new BSTW II family of mechanical controllers and limiters for electric trace heating has system approval for hazardous (potentially explosive) areas (94/9/EC), which covers the self-limiting heating cables as well. The...
March 1, 2013
Temperature is among the most critical measurements in the chemical process industries (CPI) for operating safe and efficient processes. Because even a small error in temperature can lead to expensive consequences, accurate and reliable monitoring of temperature is required. Thermowells The most accurate temperature measurements occur when the sensor is in direct contact with the process fluid being...
February 1, 2013
The TF44 sensor is designed for measuring the temperature on pipe surfaces. The small design of the protective sleeve enables optimized mounting of the sensors and the insulation above them...
November 1, 2012
With its air2guide product range for air-handling technology, this company also offers measuring solutions for cleanrooms. For positive and negative pressure control...
November 1, 2012
The PAX2C PID (proportional integral derivative) controller is specifically designed for industrial automation in the process- and temperature-control markets. The product is the latest addition to this company’s...
September 1, 2012
The new TGT73 is the third mechatronic product of the intelliTHERM family — a hybrid concept derived from pressure measurement technology. With the new thermometers, temperatures can...
August 1, 2012
This pH probe has an integrated temperature sensor Yokogawa The new SC25V (photo) is a reliable, very stable and highly accurate 12-mm pH sensor that uses a VP-type connector to integrate multiple measuring elements in a single package, including a built-in temperature sensor and liquid earth. Two versions of the sensor are available, both with pH range from 0 to 14 and designed for pressures up to 10...
March 1, 2012
The iTCX transmitter is designed to allow users to monitor temperature from two independent thermocouple channels over an Ethernet network or the Internet with no special software aside from a Web browser. Serving...
January 1, 2012
The OSXL 160 thermal imager is said to be the most versatile and competitively priced unit on the market. The device covers the temperature range of –20 to...
December 1, 2011
The XpressPDF Label monitors the temperature and time history of perishable products, such as food, vaccines, pharmaceuticals and biologics, during transport and storage. About the size of sugar packet, the...
December 1, 2011
Wahl Instruments Thermal imaging cameras help spot problem areas Heat Spy thermal imaging cameras (photo) are available in two series with 16 different configurations to suit a variety of applications. The z30 Seriew “Detector” is designed for on-the-spot maintenance inspections and repair. The z50 Series “Inspector” includes additional features for documenting and preparing reports...
December 1, 2011
The TR21 and TR22 Series resistance thermometers (direct mounted or with thermowell) can be integrated into all standard processes. The devices’ hygienic design...
Pages:  [1] 2 3 4 Next »

Get more from
Get email updates in your inbox


Subscribe to:
Chemical Engineering Magazine

Chemical Engineering Magazine and Archives

Plant Cost Index

Join us on... Twitter LinkedIn

LinkedIn Groups

Our LinkedIn group is now over 33,000 members strong!

  1. Join other CPI professionals from all over the globe and share best practices, expertise, concerns and more.
  2. Provide feedback to Chemical Engineering Editors

Current members represent Worley Parsons, DuPont, SABIC, Fluor, Air Products, LyondellBasell, Nalco, Dow Chemical, Dow Corning, BASF, Jacobs Engineering, ExxonMobil, Shell, Chevron and more.

Join Now

We also offer the following subgroup for more targeted discussions:

Search the Buyers' Guide

Plant Cost Index

Facts at Your Fingertips (archive)

Ask the Experts

Back Issues
To access this area, please log in or create an account.
Forgot your password?
Request it now.
Live chat by BoldChat