Beltran Wet Electrostatic Precipitator Systems are specified for a wide range of gas streams from metallurgical mining operations and sulfuric acid gas cleaning and used downstream from wet or dry flue gas desulfurization units, which cannot capture fine particulates and acid aerosols. They are also superior on high ash content and sticky residues (which may also contain mercury and heavy metals), oily residues/tars, mercury (as condensed oxide), and emissions from municipal solid waste (MSW) in waste-to-energy applications and biomass syngas cleaning.

• Ultralow emission for submicron particulate and acid mist
• Advanced modular design—minimized field assembly, flexible configuration
• Available in corrosion-resistant alloys or FRP construction

Beltran Technologies, Inc.
https://www.beltrantechnologies.com

ScrubPac™ VentClean Systems are available as compact, highly efficient "complete" systems that can provide over 99% removal of storage tank and rail car vent emissions caused by breathing and filling operations. The system uses a triple action scrubbing technology, is available in four model sizes - L, M, H, and EH - to handle gas capacities from 0 to 1500 cfm, and two unique operation configurations that easily adapt to a variety of scrubbing liquid preferences.

Bionomic Industries, Inc.
http://bionomicind.com

Do you want to produce high-viscosity, homogeneous mixtures with a high solid content at low cost? Nothing easier than that! The new mixing and dispersing plant XPP of IKA Works, Inc. is ideally suited to homogeneously mix large quantities of powdery solids and liquid additives without creating any agglomerates. The plant is suitable for all basic operations of mixing and dispersing in the food, chemical, pharmaceutical, electronics, and cosmetics industries. The XPP is available in 7 sizes from 50 to 4000 liters capacity and has been specially designed to achieve maximum performance in the smallest footprint.

IKA Works, Inc.
http://www.ikausa.com/products/compact-mixing-plant-xpp/

Requiring no integrated plant air to function, the MCF PowerSaver® dust collector generates energy cost-savings of up to 50% over conventional high pressure pulse jet or reverse air cleaning systems. The MCF is built to handle heavy dust loads including abrasive materials, and comes in configurations to fit most industrial air quality applications.

With the patented Never Miss™ Controlled-Cleaning System, the MCF PowerSaver® aligns the cleaning arm and bag segments, which positions the air nozzles to fire directly into the bags. No air is wasted, resulting in reduced energy consumption and extended filter bag life.

Schenck Process
https://www.schenckprocess.com/us/products/mcf-powersaver

Tuthill Springfield’s Liquid Ring vacuum pumps are simple in design but rugged in construction. The A Series is a single-stage vacuum pump built for the most severe industrial conditions and are not as susceptible to cavitation due to the axial flow design, allowing the velocity though the pump to be unchanged, carrying the air out effortlessly. The KLRC, on the other hand, is a two-stage vacuum pump ideally suited for pumping wet mixtures and even slugs of liquid with the potential to pull down as low as 4 Torr (5.3 mbar).

Tuthill Springfield
https://info.tuthill.com/ce/liquidring