Crush & Kink Resistant Vacuum Hose - Get a Sample Spiral steel reinforcement within walls of clear, smooth, chemical-resistant PVC gives Vardex® hose the strength to resist kinking and crushing. May be used for pressure or full vacuum. Vardex offers outstanding visual flow characteristics, and its non-toxic ingredients conform to FDA standards. Lightweight compared to rubber yet tough and abrasion resistant. Well stocked in sizes to 2” I.D. Complimentary sample available in your choice of size. NewAge® Industries, Inc. http://www.newageindustries.com/sample-ce1     Solidifying Subcooling Melts with ROTOFORM 4G SC The ROTOFORM 4G SC has been developed to meet the challenge presented by subcooling melts, products that remain liquid even when cooled below their melting point. The reason they refuse to crystallize and solidify is the lack of the crystal nuclei. Sandvik’s system overcomes this problem by introducing a homogeneous suspension of crystal nuclei into the melt. This is done with the scraped-surface heat exchanger, called a precrystallizer, using a cold cylindrical surface and a heated rotor. The process enables the melt to be crystallized on the steel belt in a very short time and can be used to produce the desired product form – such as pastilles, micropastilles or flakes. Typical applications for the Sandvik supercooling process include: Agrochemicals Photo chemicals Plastic additives Rubber chemicals Stabilizers Pesticides and herbicides Flame retardant Sandvik Process Systems http://www.processsystems.sandvik.com     E-finity® Dense Phase Conveying System for Gentle Handling of Bulk Materials The E-finity® is a patented continuous dense phase convey system for handling a wide range of materials, but is particularly suited for conveying fragile products. Precise pressure monitoring and airflow corrections allow the system to operate efficiently under all conditions, while gently inducing materials through the convey line in slug form. The E-finity® is also highly suitable for granular and pelleted materials. Unique E-finity® air controls can employ a single air source to operate 2-3 different systems simultaneously. The result is a significant cost savings in both equipment and installation, with continued savings in operation and maintenance moving forward. Schenck Process http://www.schenckprocess.com/products/e-finity