Benko Products manufactures a complete line of patented SAHARA HOT BOX ovens for heating 55-gallon drums or totes. These steam or electrically heated ovens can accommodate from 1 to 32 drums or 1 to 8 totes. The ovens are heavy duty, have precise temperature control and sizes can be customized. With thousands of ovens operating in the field, Benko is the right choice for your drum and tote warming needs.  Request a quote today.

Benko Products, Inc.
https://benkoproducts.com/sahara-hot-box-drum-heaters-drum-ovens/

Beltran Wet Electrostatic Precipitator Systems are specified for a wide range of gas streams from metallurgical mining operations and sulfuric acid gas cleaning and used downstream from wet or dry flue gas desulfurization units, which cannot capture fine particulates and acid aerosols. They are also superior on high ash content and sticky residues (which may also contain mercury and heavy metals), oily residues/tars, mercury (as condensed oxide), and emissions from municipal solid waste (MSW) in waste-to-energy applications and biomass syngas cleaning.

• Ultralow emission for submicron particulate and acid mist
• Advanced modular design—minimized field assembly, flexible configuration
• Available in corrosion-resistant alloys or FRP construction

Beltran Technologies, Inc.
https://www.beltrantechnologies.com

It’s critical for facilities to safely capture and contain the dust particles that are produced when chemicals are processed. Airborne dusts can cause health issues for workers, cross-contaminate other products and cause damaging combustible dust explosions. The Gold Series X-Flo dust collector safely collects and contains all dangerous airborne dusts. It exceeds OSHA mandates for factory air quality, and when equipped with a Camfil explosion vent, offers the highest combustible dust explosion protection in accordance with NFPA and ATEX standards.
Learn more.

Camfil Air Pollution Control
https://camfilapc.com

NIMU is a reusable rupture disc signalling system designed for rapid notification of rupture disc activation even in the harshest chemical environments.

The REMBE NIMU sensor is not in contact with the process meaning it is not affected by challenging process conditions or corrosive media. The intrinsically safe NIMU is installed into a tapping within the outlet of the rupture disc holder, completely isolated from the process so it does not create any leak paths and is not damaged following disc activation - critical for chemical customers where leak paths cannot be tolerated.

With the traditional membrane type signalling devices, false alarms were unfortunately common place, as the harsh operating conditions could cause the device to activate even if the disc itself had not opened. This false signalling would cause unnecessary and costly process downtime. Unlike these traditional devices, the NIMU is not negatively affected by the process.

REMBE GmbH Safety + Control
https://www.rembe.de