Mobile Navigation

Chementator

Member Exclusive

This hybrid power-generation system combines SOFC and a gas turbine

Last month, Mitsubishi Hitachi Power Systems, Ltd. (MHPS; Yokohama, Japan; www.mhps.com) launched a new, pressurized, hybrid power-generation system (photo) that integrates solid-oxide fuel cell (SOFC) stacks with micro gas turbines (MGT). The hybrid system (diagram) has a broad range of…

Member Exclusive

Ammonia as a H2 carrier enabled by a catalytic membrane

A major challenge in using hydrogen to power motor vehicles is the difficulty in transporting H2 to refueling stations. Researchers at CSIRO Energy (Melbourne, Australia; www.csiro.au/energy) have responded to the challenge by converting H2 to NH3 and then using existing…

Member Exclusive

Winning iron and titanium while making vanadium electrolyte

VanadiumCorp Resource Inc. (Vancouver, B.C., Canada; www.vanadiumcorp.com) has achieved direct and consistent recovery of vanadium electrolyte, vanadium oxides and titanium from vanadiferous titanomagnetite (VTM; vanadium-rich Fe3–xTixO4) using hydroelectricity, from the company’s Lac Dore Vanadium Project in Quebec. The company has…

Member Exclusive

Oxy-fuel burner restores air-fuel regenerative furnaces to full production

Engineers at Air Products (Lehigh Valley, Pa.; www.airproducts.com) have commercialized an improved version of the company’s Cleanfire ThruPort oxy-fuel burner for avoiding downtime during repairs and extending the lifetime of air-fuel regenerative furnaces in glass-making plants. The company’s original Cleanfire…

Member Exclusive

Chementator briefs

Desalination Recently, Formosa Petrochemical Corp. (FPCC; Mailiao, Taiwan; www.fpcc.com.tw) commissioned IDE Technologies (Kadima, Israel; www.ide-tech.com) to build a desalination plant in Yunlin County, Taiwan that will be the first large-scale application for IDE’s high-purity boron-removal process. The three-step process combines…

Member Exclusive

A probe that tests galvanizing kettles at high temperatures

To provide corrosion protection and long life, steel products are galvanized by immersion into kettles containing molten zinc. These galvanizing kettles need to be checked periodically to monitor rates of corrosion in order to avoid a catastrophic spillage of molten…

Member Exclusive

A new zeolite catalyst promises to significantly improve naphtha cracking

Chiyoda Corp. (Yokohama, www.chiyoda-corp.com) has been working on a new naphtha cracking process with the aim of producing more propylene and consuming less energy than existing naphtha thermal-cracking methods. The company has recently developed a new catalyst based on iron-…

Member Exclusive

A ‘greener’ more sustainable route to trimethylgallium

Last month, the Precious Metals Chemistry business unit of Umicore AG & Co. KG (Hanau-Wolfgang, Germany; www.pmc.umicore.com) inaugurated its production unit for making trimethylgallium (TMGa) and triethylgallium (TEGa). The new facility uses a new, patented production process to make these…

Member Exclusive

A new catalyst for making methane from CO2 and H2

The Sabatier reaction, in which H2 and CO2 react at temperatures of 300–400°C in the presence of a nickel catalyst, or an alumina-supported ruthenium catalyst, is one way to reduce CO2 into methane. Until now, however, it has been difficult…

Member Exclusive

Make more from biomass with iron

Nippon Shokubai Co. (Osaka and Tokyo, Japan; www.shokubai.co.jp) has jointly developed a new process for biomass utilization in collaboration with professor Yuichi Kita at Kobe University (www.kobe-u.ac.jp). The process is highly efficient for decomposing lignocellulose into a group of water-soluble…