Several methods are available for sizing two-phase pressure-relief valves (PRVs). Here, the API 520 homogeneous direct integration method is compared to a potentially simpler alternative that does not require integration Two-phase pressure-relief valves (PRVs) have been studied by many researchers.…
With the proper knowledge, engineers can work alongside compressor manufacturers to ensure that an optimal air compression system is installed There are various factors to consider when designing a compressed air system that help to improve the reliability and efficiency…
Areas of recent activity for pressure-relief systems include new calculation methods and updates to existing codes and standards. Included here is an overview of recent developments and a look at the results from a recent study of pressure-relief system deficiencies…
Differential-pressure (DP) level measurements are widely used in chemical and petrochemical facilities, thanks to their reliability and ease of use. Recent advances are making them even more reliable and easy to use Differential pressure (DP) level-measurement technology (Figure 1) is…
The concept of tray stability can apply to bubble caps and be used as an alternative method to determine the minimum efficient capacity of these devices. A new stability correlation for bubble-cap trays is proposed and checked against FRI data…
When wearing single-use protective gloves, sweat can create health and safety issues. Presented here is a look at the causes of the problems and possible solutions A great many situations across the chemical process industries (CPI) require quality hand protection,…
When it comes to managing complex global supply chains, visibility and collaboration are the name of the game. To drive it, companies are embracing digital strategies The global chemical process industries (CPI) are undergoing a major transformation brought about by…
Process industry plants install sophisticated air-pollution control systems, but they can be ineffective if the flowmeters on which they rely deliver inaccurate or unreliable data. This one-page reference provides information on measuring the flow of gaseous combustion products in large…
This column is based on “Cyclohexane from Benzene and Hydrogen – Cost Analysis,” a report published by Intratec. It can be found at: www.intratec.us/analysis/cyclohexane-production-cost. Cyclohexane is a relatively stable cycloalkane, present in crude oils in concentrations of 0.1–1.0%. This cycloparaffin…
A practical look at the need for validation, as well as conceptual considerations and a case study This article addresses the need for experimental validation of computer-generated distillation column simulations , and discusses the main concepts involved with experimental validation.…