Mobile Navigation

These carbon-graphite rings are ideal for reciprocating compressors

Oil- and grease-free carbon-graphite piston rings from this company are ideal for use in reciprocating compressors, where gases, such as air, steam, refrigerants, hydrogen, chlorine, nitrogen, hydrogen and oxygen, can be compressed to pressures over 800 psi. This company’s segmented…

Achieve economic and reliable separations with this sifter

The Modular Tru-Balance Sifter utilizes four to nine sieves and can obtain up to three separations. Numerous construction options mean that the sifter can be adapted to a wide range of products and installation requirements. The Modular Tru-Balance sifter is…

This level monitor can handle dusty environments

The SmartBob-TS1 is a continuous level sensor with a sealed electronics compartment designed to prevent the ingress of dust into the electronics cavity of the sensor. The sealed compartment protects critical components and enhances durability. With proven accuracy and reliability,…

A new tool for unloading oil in cold areas

Crude oil that is transported in railway cars can be too stiff to unload in cold regions. The Ecoarm is an unloading device that allows high volume flows during unloading in cold weather. Traditionally, train-transported oil is unloaded through valves…

Detect a wide range of gases with this instrument

{indesign_image: /20120101/Oldham.jpeg} Designed for the detection of explosive and toxic gases, the OLCT 10N gas detector recently received ATEX certification for use in potentially explosive environments. The instrument is capable of detecting the flammable gases methane, ethane and butane, as…

Glass rotameter is suitable for SIL applications

{indesign_image: /20120101/YokogawaCorp.jpeg} The RAGN is a glass rotamer that is suitable for safety integrity level (SIL) 1 environments, and complies with the Machinery Directive ISO 13849-1. Designed for long lifetime and maintenance-free operation, the RAGN resists highly corrosive media and…

This metering pump has new features

The metering pump from this company has been improved with new pumping elements and integral variable-frequency drive (VFD) controls. The new features expand the scope of the pump’s metering applications, and enable efficient performance when metering low-flow liquids, the company…

Temperature-related problems are avoided with this dry pump

This company has expanded its iXH family of harsh-process dry pumps with the introduction of the iXH500H Series. This new series of 500-m3/h pumps has been optimized for flat-panel, solar and advanced semiconductor processes that require high gas flows and…

These gas modules dont forget their calibration settings

The new Sentro 1 has intelligent plug in gas-sensing modules to provide safety monitoring of toxic and flammable gases. The system uses pre-calibrated, input eModules for monitoring a wide range of gases, with each one storing all of the necessary…

Member Exclusive

Turnarounds: Shorter, Safer, Simpler

Today’s plant turnarounds bear little resemblance to those of the past: Last-minute preparations and procurements combined with hurried work plans penciled into a notebook often led to undisciplined procedures, incidents and equipment that still operated with defective parts. Those bygone…