In the pharmaceutical, biotech and food processing industries, ingredients are transported, mixed, heated and cooled assuming the assurance of product purity required by lawmakers and taken for granted by consumers. Integral to the design of fluid-handling systems that…
Myths and misconceptions become part of accepted practice if repeated often enough. They are propagated by lack of fundamental particle-technology knowledge and by certain commercial interests. The list of presented here is by no means exhaustive. We have,…
Trends in the worldwide chemical process industries, especially a steep rise in the compression and liquefaction of gases to lower the costs of their storage and transportation, have heightened the engineer's need to have a working familiarity with…
The usage of Coriolis flowmeters for measuring mass flowrates has become widespread in the chemical process industries, and the range of fluids with which these meters can be employed is likewise diverse. Among those applications, Coriolis flowmeters can readily be…
These meters have no moving parts The Vortex PhD (photo) is an inline meter that measures flow of liquids, gas or steam. With a fully welded sensor construction, the Vortex PhD has no moving parts nor holes that…
Powerspan Corp. (Portsmouth, N.H.; edlinks.chemengonline.com/6514-535) is developing a process that uses an aqueous ammonia (AA) solution to capture COâ‚‚ from the fluegas (FG) of power plants. Results from a joint research project with the U.S. Dept. of Energy’s (DOE; Washington,…
PuriTech (Dessel, Belgium; edlinks.chemengonline.com/6514-536) has developed a continuous ion-exchange system, called Ionex, which uses up to 75% less water and requires about half the volume of ion-exchange resin, compared with traditional fixed-bed systems, says PuriTech projects director Filip Rochette. Ionex…
Although polymer-based piping systems have been used in the chemical process industries (CPI) for decades, the global market share is only around 10%, says Stephan Schuessler, head of technology and R&D at Georg Fischer DEKA GmbH (GF DEKA; Dautphetal, Germany;…
Professor emeritus Kiyoshi Ohtsuka and his colleagues at the Tokyo Institute of Technology, Tokyo, Japan; edlinks.chemengonline.com/6514-538) have discovered a new process that produces pure Hâ‚‚ from cellulose. The process not only has nearly a 100% yield, but produces no CO…
A traditional treatment for damaged knee cartilage is called autologous chondrocyte implantation (ACI), whereby healthy cartilage-forming cells are taken from an undamaged site of the patient and injected to the damaged site. This procedure takes many weeks, during which time,…