I D
× COMMENTARY
Digitalization Game ChangersGame Changers
The technologies associated with the Industrial Internet of Things, and…
COVER STORYIN THE NEWSNEWSFRONTSCHEMENTATOR + Show More
Chemical Engineering MagazineChementator Briefs
ANG fueling station Ingevity (North Charleston, S.C.; www.ingevity.com) has completed…
BUSINESS NEWSTECHNICAL & PRACTICALFEATURE REPORTFACTS AT YOUR FINGERTIPSTECHNOLOGY PROFILESOLIDS PROCESSINGEQUIPMENT & SERVICESFOCUSNEW PRODUCTS + Show More SHOW PREVIEWS

Comment PDF Separation Processes

Clarifying Liquid Filtration

By José M. Sentmanat José M. Sentmanat Liquid Filtration Specialists, LLC |

  There are various reasons that make filtering necessary in processes. The raw materials might have impurities that require removal at the start of the process. After the initial mixing to produce the process slurry, the mother liquor could have solids that need a separation process. Unwanted solids could also form by a chemical reaction during the production of the process liquid. The nature of the solid impurities will ultimately determine the type of equipment needed for the separation process. Sometimes, a preliminary crude separation is done by decantation, clarification, settling, coalescing or centrifuging. For some processes, a preliminary coarse prefiltration with a basket filter or a strainer is used to remove the bulk of large crystalline solids, using a relatively open filtering medium. After this coarse separation (if needed), the actual fine liquid-filtration process is performed to produce the final, clear filtrate product. This article offers recommendations and guidelines to apply in the selection, operation and troubleshooting of liquid filters. The first step in deciding which filtration method to use in a process begins with laboratory testing.   Laboratory testing The importance of laboratory testing…
Related Content
Focus on Filtration
The launch of a filter press and ceramic-disc filters After a recent acquisition of Swedish filtration-technology company NovaTek, this company…

Mettler Toledo

Reduce Explosion Risk in 2 Seconds with In Situ Oxygen Analysis

Changing to GPro® 500 in situ TDL sensors has reduced measurement time from 20 seconds to 2, and almost eliminated analyzer maintenance.

Chemical Engineering publishes FREE eletters that bring our original content to our readers in an easily accessible email format about once a week.
Subscribe Now
Reduce Explosion Risk in 2 Seconds with In Situ Oxygen Analysis
Tunable Diode Laser Spectroscopy in Critical Applications
Non-Contacting Gas Sensors Minimize the Risk of Corrosion to Plant Equipment.
5 ways to Optimize Production of Polymers and Intermediate Petrochemicals
7 Ways to Achieve Process Safety in Chemical Production

View More

Live chat by BoldChat