CSB opens investigation into chemical release in West Virginia
| By Scott Jenkins
The U.S. Chemical Safety and Hazard Investigation Board (CSB; Washington, D.C.; www.csb.gov) announced today that the agency is opening an investigation into the fatal chemical release on April 22 at the Catalyst Refiners, Inc. facility in Nitro, West Virginia that resulted in the death of two workers and injured several others. Catalyst Refiners conducts silver and ethylene oxide catalyst refining operations and is owned by the Ames Goldsmith Corporation.
CSB Chairperson Steve Owens said, “We are opening an investigation into this tragic incident to determine how it happened and identify ways to help prevent something like this from happening again.”
According to initial information, the incident involved a chemical reaction that occurred during the cleaning and decommissioning of equipment at the facility when nitric acid and another substance reportedly were mixed, resulting in the generation and release of toxic hydrogen sulfide gas in a building at the facility where numerous employees were present. In addition to the two fatalities, more than 30 people sought medical care, including one who reportedly was in critical condition. A shelter-in-place also was issued for the surrounding community.
Board Member Sylvia Johnson said, “This incident has had a real impact on workers, and on the surrounding community. Understanding what went wrong is essential so that facilities handling hazardous chemicals can operate more safely and responsibly.”
The CSB is an independent, nonregulatory federal agency charged with investigating incidents and hazards that result, or may result, in the catastrophic release of extremely hazardous substances. The agency’s core mission activities include conducting incident investigations to identify root cause of releases; formulating preventive or mitigative recommendations based on investigation findings and advocating for their implementation; issuing reports containing the findings, conclusions, and recommendations arising from incident investigations; and conducting studies on chemical hazards.
The agency’s board members are appointed by the president subject to Senate confirmation. The Board does not issue citations or fines but makes safety recommendations to companies, industry organizations, labor groups, and regulatory agencies such as OSHA and EPA.
Featured Conference
November 9-11, 2026Irving Convention Center | Dallas, TX
Explore this topic and more — live at Clean Americas. Join environmental, health, safety, and emergency response professionals tackling the industry's most urgent hazards. View Conference Program →
When a major incident strikes, the people stepping into Incident Command aren't always the ones who trained for it. Engineers, operators, trades supervisors, and compliance specialists may suddenly find themselves filling Command and General Staff roles — not because they volunteered, but because the situation demands it. Panelists will share practical strategies for leading without positional authority, tools and frameworks that help personnel rapidly orient to ICS roles, and approaches for closing the gap between day-to-day job functions and emergency command readiness before the next incident makes it urgent.
Speaking
Scott Andrews (Trans Mountain Canada Inc., Manager Emergency Management)
Kelly Codlin , MSPH, CIH (Marathon Petroleum Company, Emergency Preparedness Director)
Nick Hickson (Texas A&M Engineering Extension Service (TEEX), Hazmat Training Manager)
Josh Dubach MSc, CEM (Onterris, Senior Response Management Consultant)
This session will examine produced water as the largest waste stream in the oil and gas industry and one of its most pressing emerging challenges. It will address the growing volumes of produced water, the increasing regulatory and public scrutiny of constituents such as PFAS, salts, and Naturally Occurring Radioactive Material (NORM), and the operational implications for management, treatment, reuse, and disposal. The discussion will also explore how operators, regulators, and communities are redefining approaches to produced water management in response to environmental, technical, and stakeholder pressures.
Speaking
Steve Pepper, Ph.D., (Onterris, Director of Response Management)
Charles Maguire (Railroad Commission of Texas, Advisor, Oil and Gas Division)
Prof. Shane Walker Ph.D. (Texas Produced Water Consortium, Director)
Ray Cheatham (Onterris, Energy Sector Leader)
This session will present a detailed case study of a large-scale lithium-ion battery fire response that extended over 12 months. Attendees will explore the hazards associated with thermal runaway events, the operational challenges of suppressing lithium battery fires, and the response strategies that proved effective in this prolonged incident. The
Drawing on insights from U.S. EPA Region 9 wildfire response efforts, the session will also highlight tactics such as hazard characterization, air monitoring and evaluation, and household hazardous waste collection and disposal. Participants will leave with a stronger understanding of the complexities involved in large-scale battery fire incidents and the critical factors to consider when planning and executing an effective response.
Speaking
Robert W. May PG (Clean Harbors, Senior Vice President, Branch Services and Sales)
Crosley Welch (Missouri Department of Natural Resources, State On-Scene Coordinator)
Samuel Cheek , CSP, RRPT (U.S. EPA, Region 6, Federal On-Scene Coordinator)
Christopher Myers (U.S. EPA, Region 9, Federal On-Scene Coordinator)
This session introduces use of remote sensing technologies to detect, characterize and monitor spills across marine and coastal environments. Discussion will highlight how tools can integrate into modern spill response workflows to improve safety and support data-driven decision making.
Speaking
James Hanzalik (Clean Gulf Associates, Vice-President)
Gordon Staples (MDA Space Ltd., Senior Radar Applications Scientist)
Grant Coolbaugh (Applied Research Associates / Ohmsett, Mechanical Engineer)
Speaking
Allyson Purcell MEP, CEM (ConocoPhillips, CMER Director)
Michael Delio (Maxum Petroleum, EHS & SECURITY MGR)
This session provides a practical, ground‑level introduction to the essential steps required after a battery undergoes a thermal event. We’ll break down how to assess site conditions, stabilize and prepare damaged cells or packs, select appropriate containment and packaging methods, and navigate the regulatory landscape that governs transport and disposal. The lecture emphasizes real‑world decision‑making, safety considerations, and compliance requirements, giving participants a clear framework they can apply immediately in field operations or emergency response planning.
Speaking
Mark Steadman (The Battery Network, Program Manager)