I D
× COMMENTARYCOVER STORYIN THE NEWSNEWSFRONTSCHEMENTATOR + Show More
Chemical Engineering MagazineChementator Briefs
Depolymerization Last month, DuPont Teijin Films Ltd. (DTF; Contern, Luxembourg;…
BUSINESS NEWSTECHNICAL & PRACTICALFEATURE REPORTFACTS AT YOUR FINGERTIPSTECHNOLOGY PROFILEENVIRONMENTAL MANAGEREQUIPMENT & SERVICESFOCUSNEW PRODUCTS + Show More SHOW PREVIEWS

Comment

Expansion joints now certified for handling potable water

By Chemical Engineering |

This company’s line of EPDM (ethylene propylene diene monomer) spool-type expansion joints has received NSF/ANSI 61 certification for equipment that comes in contact with either potable water or produPRoco WCcts that support the production of potable water. The certification applies to the following EPDM expansion joint products: Series 230; Series 233L/234L; Series 271; and Series RC/RE-23. These certified expansion joints are available in sizes ranging from 1 to 120 in. in diameter. For sizes less than 8 in. in diameter, the company recommends no more than one joint per 175 ft of pipe. All of the certified products are supplied with labels to identify them as NSF/ANSI 61. — Proco Products, Inc., Stockton Calif.

www.procoproducts.com

 

Related Content

Chemical Engineering publishes FREE eletters that bring our original content to our readers in an easily accessible email format about once a week.
Subscribe Now
Reduce the Risk of Corrosion in Fertilizer Production
3 Reasons to Automate Sensor Cleaning
Protect Your Turbines from Silica with a Low Maintenance Analyzer
Your Off-line pH Measurements Might Be Misleading and Costing You a Lot of Money
Reduce Explosion Risk in 2 Seconds with In Situ Oxygen Analysis

View More

Live chat by BoldChat