I D
× COMMENTARYEDITOR'S PAGECOVER STORYIN THE NEWSNEWSFRONTSCHEMENTATOR + Show More
Chemical EngineeringChementator briefs
L-Alanine DMC Biotechnologies, Inc. (DMC; Boulder, Colo.; www.dmcbio.com) has successfully…
Chemical EngineeringPiezoelectric wood
Researchers at the Swiss Federal Laboratories for Materials Science and…
BUSINESS NEWSTECHNICAL & PRACTICALFEATURE REPORTFACTS AT YOUR FINGERTIPSTECHNOLOGY PROFILESOLIDS PROCESSINGEQUIPMENT & SERVICESAPPLIED TECHNOLOGIESFOCUSNEW PRODUCTS + Show More

Comment Sustainability

GE Renewable Energy and Veolia partner to recycle decommissioned wind-turbine blades

By Mary Page Bailey |

GE Renewable Energy announced that it has signed a multi-year agreement with Veolia North America (VNA) to recycle blades removed from its U.S.-based onshore turbines during upgrades and repowering efforts. Through this agreement, GE plans to recycle the majority of blades that are replaced during repowering efforts.

Veolia will process the blades for use as a raw material for cement, utilizing a cement kiln co-processing technology. VNA has a successful history of supplying repurposed engineered materials to the cement industry. Similar recycling processes in Europe have been proven to be effective at a commercial scale.

As a part of the agreement, blades that have been removed from turbines will be shredded at VNA’s processing facility in Missouri and then used as a replacement for coal, sand and clay at cement manufacturing facilities across the US. On average, nearly 90% of the blade material, by weight, will be reused as a repurposed engineered material for cement production. More than 65% of the blade weight replaces raw materials that would otherwise be added to the kiln to create the cement, and about 28% of the blade weight provides energy for the chemical reaction that takes place in the kiln.

Anne McEntee, CEO of GE Renewable Energy’s Digital Services business, said “Sustainable disposal of composites such as wind turbine blades has been a challenge, not only for the wind turbine industry, but also for aerospace, maritime, automotive and construction industries. VNA’s unique offering provides the opportunity to scale up and deploy quickly in North America, with minimum disruption to customers and significant benefit to the environment. We look forward to working with them on this effort to create a circular economy for composite materials.”

Wind turbine blades may be replaced through turbine improvement or ‘repowering’ efforts, when specific elements of the turbine are upgraded to improve the efficiency and lifespan of the turbine, without replacing the entire machine. Longer, lighter blades help the turbine to generate more energy every year, providing even more renewable energy to their end customers.

Bob Cappadona, COO for VNA’s Environmental Solutions and Services division, said “By adding wind turbine blades — which are primarily made of fiberglass — to replace raw materials for cement manufacturing, we are reducing the amount of coal, sand and minerals that are needed to produce the cement, ultimately resulting in greener cement that can be used for a variety of products. Last summer we completed a trial using a GE blade, and we were very happy with the results. This fall we have processed more than 100 blades so far, and our customers have been very pleased with the product. Wind turbine blade repurposing is another example of Veolia’s commitment to a circular economy and ecological transformation in which sustainability and economic growth go hand in hand.”

VNA employs 20 people from the area at the Missouri processing facility, which is located about 70 miles northwest of St. Louis.

An environmental impact analysis conducted by Quantis U.S. found that the net effect of blade recycling through cement kiln co-processing is positive in all categories. Compared to traditional cement manufacturing, blade recycling enables a 27% net reduction in CO₂ emissions from cement production and a 13% net reduced water consumption. In addition, a single wind turbine blade that weighs 7 US tons recycled through this process enables the cement kiln to avoid consuming nearly 5 tons of coal, 2.7 tons of silica, 1.9 tons of limestone, and nearly a ton of additional mineral-based raw materials. Largely due to the avoided coal consumption, this type of blade recycling also has a net-positive environmental impact in the categories of human health, ecosystem quality, and resource consumption. The resulting cement has the same properties and performance as cement manufactured using traditional means, meeting all applicable ASTM standards.

Recycling decommissioned wind turbine blades into cement production will aid the cement industry in its efforts to decarbonize. Likewise, GE Renewable Energy is committed to reducing environmental impacts throughout the life cycle of its products, including by announcing an ambitious pledge in 2019 to decarbonize its operations and achieve carbon neutrality by the end of 2020. GE Renewable Energy’s businesses are regularly partnering up with other leaders across the value chain to drive innovation for improved sustainability.

Related Content

Chemical Engineering publishes FREE eletters that bring our original content to our readers in an easily accessible email format about once a week.
Subscribe Now
Steel Belt Units for Medical Membranes
Upstream Oil & Gas: Automation intelligence from wellhead to distribution
Video - CoriolisMaster
Video - Do you really need a thermowell?
The influence of IIoT in the dewatering process step of pigment production

View More