Greentown Labs (Somerville, Mass.; www.greentownlabs.com), the largest cleantech startup incubator in North America, and BASF Corp. North America (Florham Park, N.J.; www.basf.com) one of the world’s leading chemical companies, are now accepting applications for the Greentown Labs Circularity Challenge, a six-month accelerator program. Greentown Labs and BASF are seeking innovative ideas from startups with a proof of concept solution to disrupt the plastics, energy storage and recycling value chains to enable a sustainable and circular economy. This program is supported by Stanley Black & Decker (www.stanleyblackanddecker.com), a leading global diversified industrial and a customer of BASF.
“The circular economy is all about resource efficiency and implementing sustainable practices across value chains,” said Emily Reichert, CEO of Greentown Labs. “We believe deeply in the impact innovations across the circular economy can have on our planet and we are eager to see all the great ideas startups have to improve energy storage, plastics, and recycling value chains. BASF has been a wonderful, supportive partner to the Greentown Labs community and we are proud to be running this challenge with them!”
The Greentown Labs Circularity Challenge, located at Greentown Labs in Somerville, Massachusetts, offers a collaborative environment to creatively explore, pilot and develop disruptive approaches to circularity, joining forces between corporates at different positions in the value chain — BASF and Stanley Black & Decker — and the innovative startup ecosystem. Selected startups will gain access to industry advisors and mentors, business and technical resources as well as physical infrastructure, among other benefits.
“BASF believes that the chemical industry and its innovations can lead the way in circular economy thinking and action,” said Peter Eckes, President, Bioscience Research and Regional Research Representative North America, BASF. “Yet, solving the challenges for a sustainable and circular economy requires innovation across the value chain to provide benefits to customers and suppliers, and in many cases may require completely new business models and partners. By teaming up with Greentown Labs and Stanley Black & Decker we have already initiated a collaborative environment and look forward to working with startups to explore disruptive ideas in plastics, battery materials and digital tools.”
“Stanley Black & Decker has the reach, product innovation and mindset to be a powerful force for good, especially in today’s world where so much is changing and being disrupted by technology and new ways of doing business,” said Marty Guay, Vice President of Business Development at Stanley Black & Decker. “Corporations like ours can be part of the solution yet we also acknowledge the need to partner and collaborate with other recognized leaders such as BASF and Greentown Labs. By working together, we can harness our collective skills and imagination to deliver positive business and societal outcomes in areas of mutual importance.”
Specific areas of interest within the plastics, batteries and digital tools categories for the -Greentown Labs Circularity Challenge include, but are not limited to:
-Advanced recycling technologies
-Energy-efficient processes for depolymerization (including enzymes), pyrolysis or gasification to recover building blocks
-New business models to improve the collection of batteries/cells after initial use
-Ways to optimize recycling of battery materials, including valuable metals such as cobalt, nickel, lithium, etc.
-New batteries that can be reused, repurposed or recycled more often and more cost effectively
-Digital platforms that enable new business models in circular economy
-Tools that help simulate and predict recyclability and guide designs
-Technologies that support tracking and reporting of value streams
Submissions for the program will be evaluated based on potential technological impact, strength of team, and relevance for partnership with BASF and Stanley Black & Decker, among other factors. Applicants must disclose the status of any intellectual property (IP) relevant to their submission. Selected applicants’ IP will be fully protected throughout the review process.
Selected Circularity Challenge awardee(s) are eligible for the following awards and benefits:
-Acceptance into Greentown Launch, a six-month accelerator program for startups at Greentown Labs
-$25,000 in non-dilutive grant funding
-Partnership with and/or potential investment from BASF by the end of the program
-Access to select BASF testing capabilities, global technical facilities and expertise
-Exclusive access to the Greentown Labs and BASF networks
-Desk space at the Greentown Labs Global Center for Cleantech Innovation
-Potential access to BASF-sponsored bench in Greentown’s wet lab
-Potential for joint ISO-standardized eco-efficiency analysis with BASF
-Opportunity to connect with multiple stakeholders across industries, including BASF customer and special program affiliate Stanley Black & Decker
Applications for the Greentown Labs Circularity Challenge are due by August 30, 2019 at 11:59 p.m. EDT. More information about the call for applications is available at basf.us/circularity-challenge.
BASF Corp. is the North American affiliate of BASF SE, Ludwigshafen, Germany.
Greentown Labs is a community of entrepreneurs creating solutions for today’s biggest environmental and climate challenges. Located in Somerville, Mass., and founded in 2011, the Greentown Labs Global Center for Cleantech Innovation is the largest cleantech incubator in North America, operating a 100,000 sq. ft. campus comprised of prototyping and wet lab space, shared office space, a machine shop, electronics lab, and a curated suite of programs and resources. Greentown Labs is home to more than 90 startups and has supported more than 210 since its inception.
Clariant (Muttenz, Switzerland; www.clariant.com) has opened its next High Throughput Experimentation (HTE) laboratory in Houston, Tex. The location is key…
NOVA Chemicals Corporation (Calgary, Alberta; www.novachem.com), a leading supplier of polyethylene in the Americas, is pleased to announce that Sarah…
The challenge to create more sustainable and environmentally friendly processes and products is one that many individuals and companies are…
The Alliance to End Plastic Waste (AEPW; Washington, D.C.; www.endplasticwaste.org) today welcomed 12 new companies from across the plastics value…
SABIC (Riyadh, Saudi Arabia; www.sabic.com) a global leader in the chemical industry has today launched its Sustainability Roadmap aligned to…
Up to 80% increased production rates in plastic recycling
Higher throughput and purity in sodium bicarbonate production with up to 15% less energy consumption
Help feeding nations with chemical filtering technologies
Not at the forefront of Industry 4.0?