Skip to main content
Mobile Navigation

Chemical Engineering

Highly repeatable analysis of high-carbon materials

| By Mary Bailey

EMIA-20XC is the latest addition to the EMIA-Expert Series of carbon and sulfur analyzers, specifically designed for the analysis of high-carbon materials. The EMIA-20XC provides stable and highly repeatable carbon measurements for high-carbon materials such as tungsten carbide, a key hard phase in cemented carbide materials, which are widely used in cutting tools and wear-resistant components. In cemented carbide production, the carbon balance can influence phase constitution and material properties such as hardness, toughness, and wear resistance.

Source: Horiba

Accurate control of carbon content is therefore important for maintaining consistent product quality. This company has developed a dedicated detection unit for high-carbon measurements and established optimized measurement conditions for high-carbon-content materials. Under the specified measurement conditions, the EMIA-20XC achieves a relative standard deviation (RSD) of 0.15% or less in repeated measurements of a tungsten carbide reference sample, demonstrating a high level of repeatability. The EMIA-20XC also offers two operating modes. XC Mode is optimized for highly repeatable measurements of high carbon concentrations, while Standard Mode is designed to measure lower concentrations of carbon and sulfur. Depending on the operating mode and sample mass, the instrument covers a broad concentration range—from 0.6 ppm to 20.0% for carbon and from 0.6 ppm to 1.0% for sulfur. By consolidating analyses across a broad concentration range in a single instrument, the EMIA-20XC can help improve analytical efficiency and simplify laboratory setup. — Horiba Ltd., Kyoto, Japan

www.horiba.com