Environment, Health, Safety & Security

Lower NOx emissions with this burner

March 28, 2011 | By Chemical Engineering

The ECOjet burner is designed for ultra-low NOx emissions when using a wide range of gaseous fuels, including natural gas, propane, refinery gas, landfill gases and offgas, as well as liquid fuel oils. The company says each aspect of the burner was strategically developed and tested. The burner features a staged-gas design to provide stable flames, and is applicable to package, industrial and utility boilers ranging from single- to multiburner arrangements. The ECOjet is available in capacities up to 400 MBtu/h, and can lower NOx emissions to less than 30 ppm without fluegas recirculation. — Hamworthy Peabody Combustion, Inc., Shelton, Conn.

www.hamworthy-peabody.com

Featured Conference

November 9-11, 2026 Irving Convention Center | Dallas, TX

Explore this topic and more — live at Clean Americas. Join environmental, health, safety, and emergency response professionals tackling the industry's most urgent hazards. View Conference Program

Session Briefing 1 / 6

When a major incident strikes, the people stepping into Incident Command aren't always the ones who trained for it. Engineers, operators, trades supervisors, and compliance specialists may suddenly find themselves filling Command and General Staff roles — not because they volunteered, but because the situation demands it. Panelists will share practical strategies for leading without positional authority, tools and frameworks that help personnel rapidly orient to ICS roles, and approaches for closing the gap between day-to-day job functions and emergency command readiness before the next incident makes it urgent.

This session will examine produced water as the largest waste stream in the oil and gas industry and one of its most pressing emerging challenges. It will address the growing volumes of produced water, the increasing regulatory and public scrutiny of constituents such as PFAS, salts, and Naturally Occurring Radioactive Material (NORM), and the operational implications for management, treatment, reuse, and disposal. The discussion will also explore how operators, regulators, and communities are redefining approaches to produced water management in response to environmental, technical, and stakeholder pressures.

This session will present a detailed case study of a large-scale lithium-ion battery fire response that extended over 12 months. Attendees will explore the hazards associated with thermal runaway events, the operational challenges of suppressing lithium battery fires, and the response strategies that proved effective in this prolonged incident. The

Drawing on insights from U.S. EPA Region 9 wildfire response efforts, the session will also highlight tactics such as hazard characterization, air monitoring and evaluation, and household hazardous waste collection and disposal. Participants will leave with a stronger understanding of the complexities involved in large-scale battery fire incidents and the critical factors to consider when planning and executing an effective response.

This session introduces use of remote sensing technologies to detect, characterize and monitor spills across marine and coastal environments. Discussion will highlight how tools can integrate into modern spill response workflows to improve safety and support data-driven decision making.

This session provides a practical, ground‑level introduction to the essential steps required after a battery undergoes a thermal event. We’ll break down how to assess site conditions, stabilize and prepare damaged cells or packs, select appropriate containment and packaging methods, and navigate the regulatory landscape that governs transport and disposal. The lecture emphasizes real‑world decision‑making, safety considerations, and compliance requirements, giving participants a clear framework they can apply immediately in field operations or emergency response planning.

Events

Categories

Lower NOx emissions with this burner