Bio-acrylonitrile Site selection is underway for a glycerol-to-acrylonitrile demonstration-scale plant that will enable the production of plant-based acrylonitrile (ACN). Trillium (Knoxville, Tenn.; www.trilliumchemicals.com) is partnering with Zeton (Oakville, Ont.; www.zeton.com) to design and build the plant, known as Project Falcon.…
Plant Watch BASF to build a new fermentation plant in Ludwigshafen October 12, 2023 — BASF SE (Ludwigshafen, Germany; www.basf.com) is investing in a new fermentation plant for biological crop-protection products, such as fungicides, insecticides and seed treatments, at its…
Bioresorbable polymers — those that degrade naturally over time and can be absorbed by the body — are essential for delivering a number of advanced biomedical technologies to patients, including long-acting injectable or implanted products, regenerative scaffolds, degradable medical devices,…
Producing hydrogen via methane pyrolysis – termed ‘turquoise hydrogen’ – has thus far received less attention than ‘blue’ and ‘green’ H2, but it may offer advantages over both While the vast majority of current hydrogen production occurs by steam reforming…
Alliant Energy (Madison, Wis.; www.alliantenergy.com) was recently selected to receive a $30-million grant from the U.S. Dept. of Energy’s Office of Clean Energy Demonstrations (OCED; Washington, D.C.; www.energy.gov/oced) for a proposed 200-MWh energy storage system. Alliant Energy’s new battery system,…
Building off of a process to efficiently manufacture graphene (see Chem. Eng., April 2022, p. 9), a team of researchers from Rice University (Houston, www.rice.edu) have uncovered that the process can be easily altered to also produce a nearly pure…
Last month, Metso Corp. (Espoo, Finland; www.mogroup.com) introduced a hydrogen-variant of its Ferroflame LowNOx burners as part of its NextGen Pelletizing plant product range. It is a first-of-its-kind burner to run on H2 and to operate on the LowNOx combustion…
The efficiency and cost effectiveness of modularity provides advantages for small- and large-scale projects When the right conditions exist, the benefits of modular construction — from laboratory scale to large scale — are plentiful and allow single-source, cost-effective and efficient…
Improved catalysts and reconfigured reformer designs make steam-methane reforming the most scalable, industry-ready source of ‘blue’ H2 For many decades, steam-methane reforming (SMR) has been, and still is, the technology of choice for the large-scale production of synthesis gas (syngas;…
Plant Watch OCI Global to double U.S. production capacity for ‘green’ methanol September 14, 2023 — OCI Global N.V. (Amsterdam, the Netherlands; www.oci-global.com) plans to double its green-methanol production capacity to approximately 400,000 metric tons per year (m.t/yr) in Beaumont,…