I D
× COMMENTARYCOVER STORYIN THE NEWSNEWSFRONTSCHEMENTATOR + Show More
Chemical Engineering MagazineChementator Briefs
Sulfur control Preferential Oxidation Catalysis — a new catalytic solution…
BUSINESS NEWS
Chemical Engineering MagazineBusiness News
Plant Watch Perstorp will construct new plant for sodium formate…
TECHNICAL & PRACTICALFEATURE REPORTFACTS AT YOUR FINGERTIPSTECHNOLOGY PROFILEEQUIPMENT & SERVICESFOCUSNEW PRODUCTS + Show More SHOW PREVIEWS

Comment

This mixer is designed for hot melts and viscous dispersions

By Chemical Engineering |

Charles Ross & Son


The Model CDA-800 multi-shaft mixer (photo) has a special triple-shaft design specifically suited for hot melts and viscous dispersions. The CDA-800 has a mixing capacity of 500–800 gal and is designed for full-vacuum operation (29.5 in. Hg). The mixer is suitable for high-temperature operation up to 600˚F and includes an insulated 50-psig stainless-steel dimpled jacket covering the side and bottom of the dished-bottom mixing can. The removable mix vessel sits 24 in. above the floor for convenient discharge. Speed, time, temperature and vacuum level are displayed on a 10-in. touchscreen and controlled via a programmable logic controller (PLC). — Charles Ross & Son Co., Hauppauge, N.Y.


www.mixers.com

Related Content
This agitator avoids fibrous buildup
The Chemineer RL-3 impeller (photo) has been specifically engineered to prevent fibrous material buildup on the rotating impeller. This rag-shedding…

Chemical Engineering publishes FREE eletters that bring our original content to our readers in an easily accessible email format about once a week.
Subscribe Now
Quadruple Sensor Lifetime with a Retractable Housing
Minimizing Explosion Risk Where Other Solutions Cannot
Minimizing Corrosion with Fast, Robust Gas Analysis
Lower Measurement Point Costs with Automatic pH Sensor Cleaning
Reduce the Risk of Corrosion in Fertilizer Production

View More

Live chat by BoldChat