New Products & Services
May 2025
Rotron CP and EN regenerative blowers (photo) are engineered to provide safety and efficiency in hazardous and corrosive environments. Constructed from aluminum, these blowers are naturally spark- and corrosion-resistant, distinguishing them from other blowers that are typically made of steel or other materials that are vulnerable to corrosion and sparking. This advantage is further enhanced by the inclusion of stainless-steel nuts, bolts and hardware, standard across all Rotron regenerative blowers for chemical processing applications. In contrast, many comparable blowers opt for low-cost zinc-plated fasteners that are more susceptible to corrosion. The proprietary Chem Tough process used to fabricate Rotron regenerative blowers transforms the aluminum into an oxide ceramic with selected fluorocarbons, providing high levels of chemical resistance, hardness and permanent lubricity. Additionally, Rotron regenerative blowers feature full C-face motors designed to protect motor windings and bearings from corrosive gases and the airstream. — Bison, an Ametek business, Kent, Ohio
This company’s PAL Two (photo) is a new handheld spectrometer technology used for identifying various plastics and textiles, specifically in recycling processes. Designed with ergonomics in mind, PAL Two allows for single-handed operation, making it user-friendly and convenient. Additionally, it includes a built-in display that presents measurement results directly on the device, enhancing usability and accessibility for users. All of the company’s mobile near-infrared (NIR) spectroscopy solutions can accurately identify over 30 different types of plastics, including common consumer plastics and engineering plastics, as well as quantify blends of polyethylene (PE) and polypropylene (PP). In the realm of textile identification, the solution can detect a diverse array of fiber materials including acrylic, cotton, elastane, polyamides, polyester, silk, viscose and wool. It also has the capability to analyze textiles composed of multiple materials. The spectroscopy platform is accompanied by an app that leverages cloud-based data analysis, along with a user portal for managing results, reports and data. — trinamiX GmbH, a subsidiary of BASF SE, Ludwigshafen, Germany
This Nordberg HPe crusher series (photo) has been recently expanded to include six total models, covering a wide range of size categories and process stages, from secondary to tertiary and quaternary crushing. The latest size class of the series, the new Nordberg HP450e offers enhanced performance, higher uptime, wider application coverage, faster and safer serviceability and a series of other improvements. Enhanced performance capabilities with the new model include: 10% more head motion; 13% more power; and 20% more force. This model also has been designed with new, more efficient chambers, a head-spin brake for higher uptime and a feed-cone lifting tool. — Metso Corp., Espoo, Finland
Varipond C (photo) is a new technical solution for decanter centrifuges that enables simple, fast and precise adjustment of the separation zone and pond depth. Varipond C ensures consistent separation results and high product yields in the production of beverages, food and edible oils, as well as in petroleum refineries. It also helps to reduce energy consumption by around 30% compared to conventional centripetal pumps. The system is available for all of this company’s decanters ranging from the CF 3000 to CF 8000 models, and is suitable for both two-phase and three-phase processes, regardless of decanter size, where users need to respond to varying feed conditions, flowrates or different starting materials. Varipond C can be combined with a hydrohermetic seal to prevent oxygen intake. This reduces product oxidation and improves quality, which is particularly beneficial in the beverage industry. Combined with the pre-installed Internet of Things (IOT) gateway and connection to GEA Cloud, Varipond C also enables comprehensive process optimization. — GEA AG, Düsseldorf, Germany
Drivetrain Analyzer Cloud (photo) helps companies significantly reduce the energy consumption of their drive systems through energy-based maintenance. The Connection Module IOT collects extensive data from the drive train and transmits it to the Drivetrain Analyzer Cloud. There, relevant operating data such as load, electrical power consumption and energy consumption of the drives are continuously calculated and displayed. Drivetrain Analyzer Cloud also helps to save energy by using advanced artificial-intelligence (AI) analysis algorithms to accurately detect deviations from the optimal operating point, monitor energy consumption, CO2 emissions and costs, and generate optimization suggestions. Thanks to its data-driven approach, it even precisely calculates the return on investment (ROI) so that future investments can be allocated as accurately as possible. This allows users to take targeted actions to increase energy efficiency, for example, by adjusting the engine control, maintenance intervals and load distribution. Drivetrain Analyzer Cloud also detects when an engine is operating inefficiently and automatically recommends a more efficient alternative. According to this company, using Drivetrain Analyzer Cloud can reduce the energy consumption of a drive system by 10 to 20%. — Siemens AG, Munich, Germany
Globaltherm C1 FF is a synthetic clean and flush product (photo) designed to simplify maintenance for industries relying on heat transfer systems. Globaltherm C1 FF offers a safer, faster and more cost-effective alternative to traditional cleaning methods, says the manufacturer. Specifically formulated for systems operating with synthetic product in liquid phase, Globaltherm C1 FF is engineered to tackle deposits caused by oxidized, degraded or contaminated fluids that can foul system interiors. This fouling compromises efficiency and safety, making cleaning essential before recharging the system with fresh fluid. A key feature of Globaltherm C1 FF is its synthetic hydrocarbon composition, which includes a high flashpoint and high initial boiling point, making it a safer alternative to conventional cleaning agents, particularly for applications involving high-flashpoint products. Additionally, the product is compatible and miscible with most organic heat-transfer fluids, ensuring seamless integration and cleaning without a full drain-down of residual fluid. — Global Heat Transfer Ltd., Staffordshire, U.K.
This company recently launched its Energy Optimization Service (photo) for centrifugal pumps in energy-intensive industries. This service is designed to create new best-practice standards for the operation of centrifugal pumps across their lifecycle. The solution brings together digital analysis, machine learning and ongoing monitoring to drive down carbon emissions, enhance reliability and reduce energy costs. According to the company, the solution has been deployed at a manufacturing site in Spain, resulting in five pumps being re-rated. These modifications reportedly increased energy efficiency from 72 to 83%, reducing site electricity use by over 5,000 MWh annually. Consisting of four steps, the service starts with an initial pump energy audit to identify areas of inefficiency with the proprietary PumpWise calculator, outlining potential energy and monetary savings. Next, a tailored proposal is presented and recommended upgrades and retrofits are implemented. Post-retrofit, reliability and efficiency are maintained through access to the proprietary Blue Box machine-learning analysis platform. — Sulzer Ltd., Winterthur, Switzerland
This company has launched two new sealless pumps in its Ultrachem product line — the UCR and UCP Series centrifugal magnetic-drive pumps. The UCR Series (photo) is engineered for reliability in the most extreme chemical processing applications. Featuring pure ethylene tetrafluoroethylene (ETFE) housing lining, barrier liner and molding over magnets, the UCR provides the ultimate in corrosion resistance, making it suitable for applications in mining, chemical and metal manufacturing. The inner drive magnets are completely encapsulated in unfilled ETFE and are vacuum-tested for superior protection, and the unique snap-fit impeller connection provides easy maintenance and inventory flexibility. With a maximum working pressure up to 300 psi and temperatures up to 250°F, the UCR series can handle flow ranges from 1 to 1,450 gal/min. The UCP Series offers chemical resistance and enhanced hydraulic capabilities. Its polypropylene/ETFE construction provides cost-effective chemical resistance, while the glass-filled polypropylene impeller and barrier with carbon-fiber reinforced exterior ensure durability. The UCP series can handle maximum working pressures up to 300 psi, temperatures up to 180°F and flow ranges up to 450 gal/min. — Finish Thompson, Inc., Erie, Pa.
The Flexim Fluxus/PIOX 731 Series (photo) is a new range of non-intrusive, clamp-on ultrasonic flowmeters designed to offer flexibility, convenience and availability. The nine models in the 731 Series feature high-performance volumetric and mass-flow sensing technologies and a robust, functional design, providing accurate and reliable measurements for both liquids and gases, with no process media pressure limitations. The 731 Series provides disturbance correction for enhanced accuracy in challenging conditions, such as disturbed flows. It also provides the Advanced Meter Verification feature to validate meter performance, Wet Gas Correction to ensure accurate gas stream measurements and the Dynamic Gas Meter feature for precise mass and volume correction. Various models are available to meet varying application requirements, including in plants, pipelines and terminals, water and wastewater facilities and building energy management. — Emerson Electric Co., St. Louis, Mo.
Wireless networking via 5G enables industrial companies to achieve fast communication, reliable data transmission, and flexible processes, for example in maintenance. The new explosion-proof Smart-Ex 203 smartphone (photo), first presented at the Hannover Messe 2025 tradefair, supports the use of 5G (and 4G) connectivity in ATEX/IECEx Zone 2/22 and Division 2. The 6.3-in. device empowers users to take their digital processes and augmented reality (AR) applications into expanded plant locations. — Pepperl+Fuchs SE, Mannheim, Germany
Designed to deliver durability and emissions control, the FlexCore liquid-mounted seal flor floating-roof tank applications ensures a superior vapor-tight seal by combining a reliable foam-log core with Armor Fabric vapor-barrier seal fabric. This design not only reduces emissions and already meets the EPA’s newest Clean Air Act standard (40 CFR 60 Kc), but also eliminates any vapor space and provides enhanced abrasion resistance, resulting in an elongated service life. FlexCore is faster to install and requires less labor and hardware than a mechanical shoe seal. It employs a variable-height mounting system to reduce foam log weight and simplify installation, also eliminating the need for hundreds of small fasteners and hardware. The FlexCore technology was recently honored in the Emerging Technologies category at the 2025 Global Tank Storage Awards. — Mesa Engineered Tank Products (ETP), Cincinnati, Ohio