I D
× COMMENTARYIN THE NEWSNEWSFRONTSCHEMENTATOR + Show More BUSINESS NEWSTECHNICAL & PRACTICALFEATURE REPORTFACTS AT YOUR FINGERTIPSTECHNOLOGY PROFILEENGINEERING PRACTICEENVIRONMENTAL MANAGEREQUIPMENT & SERVICESFOCUS
Focus on Valves
Safe combustible-dust-explosion isolation Isolation is essential to protect adjoining system…
NEW PRODUCTS + Show More

Comment PDF

Scaleup slated for a ‘greener’ cement

By Gerald Ondrey |

This summer, Celitement GmbH (Eggenstein-Leopoldshafen, Germany; www.celitement.de) will begin construction on a pilot plant to produce a new cement known as Celitement. Located at the north campus of the Karlsruhe Institute of Technology (KIT; www.kit.edu), the facility will produce up to 100 kg/d of Celitement when it starts operating in 2011, using a process first developed at KIT. In the first step, limestone and sand (Ca-to-Si mole ratio of 0.5–2.0) and water are transformed into calcium silicate hydrates in an autoclave operating at 180–210°C and 10–20 bar. The product is dried, then mixed with a second silicate component and transformed into Celitement — a hydraulically active calcium hydrosilicate — by a reactive milling process. Additives can be used to control the hydration and the quality of the final product. The process operates at considerably lower temperatures than that used in conventional routes to Portland clinker (up to 1,450°C), and therefore consumes about half the energy with a corresponding reduction in CO2 emissions, says the company. The process also uses “far less” lime, and the product binding material can be handled just as ordinary Portland cement. Addition…
Related Content
Chementator Briefs
Direct route to PG Dow Inc. (Midland, Mich.; www.dow.com) and Evonik Industries AG (Essen, Germany; www.evonik.com) have entered into an…

Chemical Engineering publishes FREE eletters that bring our original content to our readers in an easily accessible email format about once a week.
Subscribe Now
Improving chemical production processes with IIoT and AI technologies
New filtration technology for highly corrosive media
PTA production: Lowering OPEX without compromising on quality
Sure that zero means zero in your zero-liquid discharge (ZLD) process?
How separation processes profit from Industrial Internet of Things (IIoT) solutions

View More

Live chat by BoldChat