Conventional combustors that employ air-blast and pressure-swirl injection technologies are very sensitive to fuel properties, especially viscosity, limiting their ability to utilize certain classes of fuels and blends, including bio-based fuels. The new swirl-burst (SB) fuel-injector technology developed at Baylor…
The demand for “green” methanol as a low-carbon fuel is rising, making it a valuable commodity, as well as a promising avenue for waste-carbon utilization, especially since it can be readily produced from “stranded” carbon sources, such as flare gas.…
Advanced level measurement devices enhanced with intelligence solve CPI challenges Chemical processes often require handling media that is corrosive, flammable, explosive or toxic with wide ranges in temperature and pressure and characteristics that include steam, dust, foam, turbulence and condensation.…
Sustainable SMR In the pursuit of lowering greenhouse gas emissions, hydrogen has gained much attention as a potentially “clean” energy source. Typically, hydrogen is produced by steam methane reforming (SMR), a process which itself produces greenhouse gases. Efforts to lower…
Henry Kister shares lessons learned from troubleshooting distillation towers This conversation started in a course I was presenting in Sydney, Australia. I was about 15 minutes into my presentation when a delegate from a major petroleum refinery stopped me. “How…
Plant Watch Evonik breaks ground on specialty-amine production plant in Nanjing November 11, 2024 — Evonik Industries AG (Essen, Germany; www.evonik.com) has broken ground on its plant expansion for specialty amines in Nanjing, China. The Nanjing plant specializes in producing…
The push toward decarbonization is driving an increased interest in electrochemical processes. Here, the authors share their experience in industrializing these processes The field of electrochemistry offers a disruptive methodology to revolutionize the chemical process industries (CPI) by electrifying processes.…
This packaging film is water soluble EcoSol® is a PVOH (polyvinyl alcohol) film (photo) that dissolves in water in minutes. It can be made into bags, pouches and sachets of many different sizes to create an efficient delivery system for…
A new demonstration plant is upcycling gypsum (calcium sulfate) — a material that is typically challenging to dispose of — at a metal-refining site using a process that combines salt-splitting electrolysis, caustic direct-air capture (DAC) and mineralization. Travertine Technologies, Inc.…
A couple of years ago on Chemical Engineering’s 120th anniversary, I looked back at the history of this publication and at that time, I wrote: “In September of 1902, the first issue of Electrochemical Industry was published to serve those…