Mobile Navigation

Latest News

This face shield has safety goggles built in

Typically, when workers wear a face shield, they still have safety glasses on underneath. That is because most face shields have gaps on the bottom and sides that can let dangerous materials in. Conversely, Vader Combo (photo) is a face…

This filter handles contaminated polymer melts

The ECO 500 (photo) is a high-performance melt filter for the filtration of heavily contaminated polymer feedstock. For chemical recycling, this technology is suitable for filtering low-viscosity polymers. The filter is self-cleaning, with a rotating, perforated drum, through which there…

Hygienic counting machines for food products

The WD Series (photo) is a new counting system designed for precise counting and dispensing of individual food products in a variety of applications where cleanliness is paramount, including poultry, meat, seafood, cheese, confectionary and bread products. WD Series machines…

Member Exclusive

Impact of Particle-Size Control on Bulk-Solids Flow Behavior

Crushing and screening of solids are essential to many solids-handling processes, but engineers must be mindful about how those actions will affect flow behavior of the bulk material When it comes to processing bulk solids, (particle) size matters. Almost all…

Easy-to-operate level-measuring devices

The new generation of Micropilot 80 GHz radar sensors (photo) — FMR60B, FMR62B, FMR63B, FMR66B and FMR67B — are suited for challenges when measuring points that are not easily accessible, located in dusty areas and harsh environments with extreme process…

Member Exclusive

Materials of Construction for the CPI

The proper selection of materials of construction is crucial. The example presented here shows how to use standards to help narrow down the options Since the late 1800s, a steady body of pressure technology codes and standards have been under…

Member Exclusive

Minimizing the Effects of VOCs and Reactive Gases on Industrial-Grade LED Lighting

Chemical plants should not overlook the potential problems that can arise from damaged or malfunctioning lighting fixtures It is no secret that many chemical plants and industrial sites are prone to harsh environmental conditions that can wreak havoc on equipment…

Member Exclusive

Standard Operating Procedures are Critical for Boiler and Steam Operations

An overview on the importance of standard operation procedures (SOPs) and how to write them Today, it is necessary to have standard operating procedures (SOPs) for steam and condensate systems, boilers, deaerators and even steam process units (Figure 1). An…

Member Exclusive

Tower Doctor: Can the Cure be as Bad as the Illness?

Henry Kister shares lessons learned from troubleshooting distillation towers During a course that I was presenting in Houston one year, a participant asked me the following at the end of one of the sessions: “Do you have experience with BX-type…

These towers emit clearly visible light signals

The new TL 305 series light towers (photo) provide bright and homogeneous illumination, indicating states, faults and ongoing processes clearly and visibly from a distance. The compact towers are available preconfigured with three, four or five segments. The new range…