Mobile Navigation

Latest News

Member Exclusive

Fouling-immune membrane available for brackish-water RO applications

In November 2023, the first commercial test was initiated for a novel, fouling-immune membrane for brackish-water reverse osmosis (BWRO) applications through an early-access program. Membrane developer ZwitterCo (Woburn, Mass.; www.zwitterco.com) says its membrane is fouling-immune in cases where fouling of…

Shorten lead times with this high-rate thickener

This company is launching a pre-engineered high-rate thickening solution, The HRT-S (photo) is a pre-engineered, high-rate thickener that will allow significantly shorter delivery times. The HRT-S thickener is a part of the company’s Planet Positive offering, enabling savings in power…

Accurately dose smaller volumes with this system

Standard load cells enable mechanical dosing with an accuracy ranging from 0.2 to 1%. This means that you can accurately dose 10 kg down to 20–100 g or 1,000 kg down to 2–10 kg. However, for mixing small product volumes,…

These solenoid valves handle high flow with minimum power

The new ASCO Series 327C solenoid valve (photo) features a direct-acting, high-flow design that provides superior flow-to-power ratio compared to similar valves. The Series 327C design features a balanced poppet construction that permits high flows at minimum power levels, making…

Member Exclusive

A continuous electrochemical process for direct-air CO2 removal

Direct-air capture (DAC) of atmospheric carbon dioxide presents promise for helping to reach global-warming reduction goals. However, many DAC technologies are hindered by high costs and inefficiency. RepAir Carbon (Yokne-am Illit, Israel; www.repair-carbon.com) recently launched a field prototype of its…

Member Exclusive

Sand-based thermal-energy storage

Using concentrated solar thermal (CST) energy to supply industrial-heating requirements is a promising way to reduce the use of fossil fuels. This is the aim of Magaldi Green Energy (Rome, Italy; www.magaldigreenenergy.com), which developed its Solar Thermo Electric Magaldi (STEM)…

Residue-gas analyzers for cleanliness verification

OmniGrade (photo) is a residual-gas analysis (RGA) system that is designed to meet specific testing demands. OmniGrade configurations include two or three chambers: the spectrometer chamber in which the mass spectrometer is positioned, and a measurement chamber where the samples…

Member Exclusive

Converting a steel mill to climate-neutral steel production

To decarbonize steel production and its high carbon dioxide emissions, Fraunhofer researchers, TS Elino GmbH (Dürren; www.elino.de) and Salzgitter AG (all Germany; www.salzgitter-ag.com) are working on converting an existing steel mill to climate-neutral production methods. The aim is to produce…

Member Exclusive

Chementator Briefs

CO2 to CO SK Innovation Institute of Environmental Science & Technology, an R&D organization of SK Innovation Co. Ltd. (Seoul, South Korea; www.skinnovation.com), has successfully manufactured about 1 kg/d of CO using diatomic catalyst (DAC) technology, which selectively converts CO2…

Member Exclusive

Converting natural gas to alcohols using MOFs

Capturing natural gas from petroleum drilling wells is economically challenging, but would have positive environmental impacts because it would eliminate the need for flaring and could allow the hydrocarbons to be converted into useful chemicals. Now, research led by chemists…