The next-generation Certincoat hot-end coating system applies a uniform layer of tin oxide to the surface of glass containers just after they emerge from the bottle-forming equipment. The tin oxide provides a good surface for the adhesion of cold-end coating.…
Pig Flammable Safety Cabinets for chemical storage have fully MIG-welded 14- and 18-gage steel construction, and the impact-resistant steel door faces are 56% thicker than other cabinets on the market, the company says. A three-point zinc latch ensures failsafe, non-sparking…
X-Series washers from this company are designed to secure bolts so that they do not undergo spontaneous loosening due to vibration and dynamic loads. The washers feature an exclusive spring effect that protects against slackening due to settlement and relaxation.…
Introduced recently at the Fakuma trade fair (Friedrichahafen, Germany), a new Noryl resin not only complies with current European and global sustainability regulations regarding materials used in potable water systems, but also with new tougher regulations slated to go into…
The Pharma parallel co-rotating twin-screw extruder is designed specifically for pharmaceutical applications to minimize material costs, be easier to use, and optimize space. To achieve this, the benchtop extruder uses a minimal amount of sample material and features a user-friendly…
The “stretch hood i” packaging system is noteworthy for its compact dimensions and high energy efficiency. The system also requires less film, and is said to be easier to maintain thanks to its “one-for-all” concept. The control panel makes for…
The ColorWorks C831 Wide Label Printer is designed to enable chemical manufacturers and transporters comply with the Globally Harmonized System (GHS) labeling standards. The GHS labeling standards focus on conveying health, physical and environmental hazard information using universally understood pictograms,…
The new, explosion-proof EPL-21-IRLED is a portable infrared light-emitting diode (LED) light for low-voltage power requirements. The watertight light can be operated in wet environments, and the illumination from the LED produces a flood beam that is approximately 160 ft…
The ZSK MEGAvolume Plus twin-screw extruder, featuring 54-mm-dia. screws, has been custom made by this company for a new production line for the food industry that was recently commercialized by Dinnissen B.V. (Sevenum, The Netherlands). Tradenamed Magi-N.ext, the new production…
The Sitop smart family (photo) has been extended with three single-phase, 24-V power supplies with rated output currents of 2.5, 5 and 10 A, as well as two 12-V power supplies with 7- and 14- A outputs. The output voltage…