Skip to main content

Events

Categories

Environment, Health, Safety & Security

This safety controller replaces relays

| By Chemical Engineering

The SC22-3 safety controller is an efficient solution for connecting several safety devices to machine controls. The controller, developed by partners Banner Engineering, eliminates the need for several dedicated safety relays and integrates input devices, such as emergency stop switches, light screens, two-hand controls, interlocking switches or safety mats, in the machine control. A total of 22 contact-based and PNP solid-state inputs can be monitored, so that a broad range on input types for safety and non-safety devices can be covered. The controller is approved up to and including SIL 3 in accordance with IEC 62061 and IEC61508 as well as Performance Level e in accordance with ISO 13849-1. — Hans Turck GmbH & Co. Hgm Mülheim and der Ruhr, Germany

www.turck.com

Featured Conference

Clean Americas logo
November 9-11, 2026 Irving Convention Center | Dallas, TX
Explore this topic and more — live at Clean Americas. Join environmental, health, safety, and emergency response professionals tackling the industry's most urgent hazards. View Conference Program
Register Now
Session Briefing 1 / 6

When a major incident strikes, the people stepping into Incident Command aren't always the ones who trained for it. Engineers, operators, trades supervisors, and compliance specialists may suddenly find themselves filling Command and General Staff roles — not because they volunteered, but because the situation demands it. Panelists will share practical strategies for leading without positional authority, tools and frameworks that help personnel rapidly orient to ICS roles, and approaches for closing the gap between day-to-day job functions and emergency command readiness before the next incident makes it urgent.

Speaking
  • Scott Andrews (Trans Mountain Canada Inc., Manager Emergency Management)
  • Autumn Albright (Marathon Petroleum Company, MPLX Compliance Specialist)
  • Kelly Codlin , MSPH, CIH (Marathon Petroleum Company, Emergency Preparedness Director)
  • Nick Hickson (Texas A&M Engineering Extension Service (TEEX), Hazmat Training Manager)
  • Josh Dubach MSc, CEM (Onterris, Senior Response Management Consultant)

This session will examine produced water as the largest waste stream in the oil and gas industry and one of its most pressing emerging challenges. It will address the growing volumes of produced water, the increasing regulatory and public scrutiny of constituents such as PFAS, salts, and Naturally Occurring Radioactive Material (NORM), and the operational implications for management, treatment, reuse, and disposal. The discussion will also explore how operators, regulators, and communities are redefining approaches to produced water management in response to environmental, technical, and stakeholder pressures.

Speaking
  • Steve Pepper, Ph.D., (Onterris, Director of Response Management)
  • Charles Maguire (Railroad Commission of Texas, Advisor, Oil and Gas Division)
  • Prof. Shane Walker Ph.D. (Texas Produced Water Consortium, Director)
  • Ray Cheatham (Onterris, Energy Sector Leader)

This session will present a detailed case study of a large-scale lithium-ion battery fire response that extended over 12 months. Attendees will explore the hazards associated with thermal runaway events, the operational challenges of suppressing lithium battery fires, and the response strategies that proved effective in this prolonged incident. The


Drawing on insights from U.S. EPA Region 9 wildfire response efforts, the session will also highlight tactics such as hazard characterization, air monitoring and evaluation, and household hazardous waste collection and disposal. Participants will leave with a stronger understanding of the complexities involved in large-scale battery fire incidents and the critical factors to consider when planning and executing an effective response.

Speaking
  • Robert W. May PG (Clean Harbors, Senior Vice President, Branch Services and Sales)
  • Crosley Welch (Missouri Department of Natural Resources, State On-Scene Coordinator)
  • Samuel Cheek , CSP, RRPT (U.S. EPA, Region 6, Federal On-Scene Coordinator)
  • Christopher Myers (U.S. EPA, Region 9, Federal On-Scene Coordinator)

This session introduces use of remote sensing technologies to detect, characterize and monitor spills across marine and coastal environments. Discussion will highlight how tools can integrate into modern spill response workflows to improve safety and support data-driven decision making.

Speaking
  • James Hanzalik (Clean Gulf Associates, Vice-President)
  • Gordon Staples (MDA Space Ltd., Senior Radar Applications Scientist)
  • Grant Coolbaugh (Applied Research Associates / Ohmsett, Mechanical Engineer)
Speaking
  • Allyson Purcell MEP, CEM (ConocoPhillips, CMER Director)
  • Michael Delio (Maxum Petroleum, EHS & SECURITY MGR)
  • Travis Hallam (Three Affiliated Tribes Pipeline Authority, Director)

This session provides a practical, ground‑level introduction to the essential steps required after a battery undergoes a thermal event. We’ll break down how to assess site conditions, stabilize and prepare damaged cells or packs, select appropriate containment and packaging methods, and navigate the regulatory landscape that governs transport and disposal. The lecture emphasizes real‑world decision‑making, safety considerations, and compliance requirements, giving participants a clear framework they can apply immediately in field operations or emergency response planning.

Speaking
  • Mark Steadman (The Battery Network, Program Manager)
  • Dalan Zartman (Energy Security Agency, CEO)