Mobile Navigation

Free firmware upgrade adds MQTT IIoT support

This company has released a free firmware upgrade enabling new and existing MicroSmart FC6A Plus PLC CPUs (photo) to support the industry-standard MQTT protocol. The upgrade can be downloaded to the FC6A CPU, so it is easy for users to…

Humidity and temperature transmitters for hazardous areas

The new Humicap HMT370EX series of intrinsically safe humidity and temperature transmitters (photo) are designed specifically for hazardous and explosive environments. The entire transmitter can be installed directly in explosive areas, up to Zone 0 and Zone 20, with no…

Separate xylene isomers with less energy

Xylene isomers are usually derived from the catalytic reforming of crude oil, and require costly methods to separate them from each other, including distillation, fractional crystallization and adsorption in high-temperature and high-pressure environments. “The separation of xylene’s isomers requires much…

Anaerobic fermentation process using human gut microfauna

Industrial-scale production of protein-rich food additives based on anaerobic fermentation is slated to begin later this year at a former bioethanol site in Minnesota. The facility will use a fermentation process developed by White Dog Labs (WDL; Newark, Del.; www.whitedoglabs.com)…

These sealed bearings improve worker safety

This company’s Cooper split spherical roller bearings (photo), available in open or sealed configurations, are designed for easy replacement with little disturbance to the shaft alignment or driveline and eliminate the need to remove attached equipment. This bearing solution increases…

New defoamer for wood coatings is compliant with EcoLabels

Increasing regulatory requirements mean that proven wood coatings must be reformulated. This company is introducing TEGO Foamex 812, a new defoamer that has an ideal balance of effectiveness and compatibility, while meeting stringent regulatory requirements. The new defoamer meets the…

Differential-pressure gages are protected in hazardous areas

The AT-2000 Magnehelic differential-pressure gage (photo) is ATEX/IECEx approved and incorporates a flameproof aluminum enclosure with textured epoxy coating that protects the device for use in hazardous areas commonly found in chemical processing or other industrial applications. The AT-2000 gage…

Use these fans in high-pressure, high-flow applications

New BC-2200 backward-inclined fans (photo) are designed for high-flow, high-pressure applications handling clean air and light particle-laden or moist-air gas streams in a variety of applications, including thermal oxidation, steelmaking, combustion air, ethanol production, petroleum refineries, dust or fume control,…

Sustainable enzyme-based production of macrocyclic lactones for fragrances

Planned commercial-scale production of macrocyclic gamma-lactone molecules using an enzymatic process will supply the flavors and fragrances market with sustainable alternatives to existing processes based on synthesizing petroleum-derived molecules or isolating molecules from natural sources. The synthetic biology company Conagen…

Modular NGL recovery

Honeywell UOP (Des Plaines, Ill.; www.uop.com) has adapted its recycle-split-vapor (RSV) technology for natural-gas liquid (NGL) recovery into a new, modular offering, RSV2, which enables quick retrofitting of existing gas-processing plants with minimal downtime. “The RSV2 technology can increase ethane…