A clear understanding of grout material properties is important to ensure that equipment is effectively protected against vibration and misalignment Reliability of critical rotating equipment depends first and foremost on maintaining precision alignment. This requires a robust foundation under the…
Follow the guidance provided here to avoid many of the problems that can arise during the relocation of laboratory facilities The decision to move a laboratory from an existing space to a new research facility is often warranted. A merger…
The E-finity (photo) is a continuous, dense-phase conveying system for fragile materials. Precise pressure monitoring and airflow corrections allow the system to operate efficiently under a wide range of conditions, while gently inducing materials through the conveying line in slug…
The CGM 750 (photo) is a new cone mill with a diameter of 29.5 in. (750 mm) that gently grinds fatty, heat-sensitive, sticky, moist or fragile materials into uniform particle sizes with minimal fines at rates up to 32 metric…
The Rosemount CX1100 in-situ oxygen analyzer (photo) is said to be the first high-performance, zirconia-cell-based combustion-control system designed to improve energy efficiency and meet environmental regulatory requirements for small and midsize boilers. It features the same sensor reliability found in…
The CL 10HY-V2 density cell and Series 2000 density digital converter (photo, p. 37) can be used to measure the density of ammonium hydroxide, caustic soda, ethylene glycol, methanol, nitric acid, oleum, phosphoric acid, sodium chloride and sodium hydroxide. The…
The MagnaShear motor brake (photo) employs oil shear technology that transmits torque between lubricated surfaces, thereby preventing wear on friction surfaces. A patented fluid-recirculation system dissipates heat, eliminating heat buildup, which is the most common problem in dry braking systems.…
The activated sludge process (ASP) is designed to speed up the rate of decomposition of waste material in water. First developed in 1914, it remains an important means of treating both municipal and industrial wastewaters. This one-page reference provides information…
IFAT (May 14–18, Munich, Germany; www.ifat.de) is the world’s leading tradefair for water, sewage, waste- and raw-materials management. This year, two additional halls have been added, with more than 3,100 exhibitors expected to participate, presenting the latest products and services…
This company’s Sanipacking fills (photo) prevent the growth of bacteria and reduce the risk of Legionella bacteria in wet cooling towers with open circuits. Sanipacking fills also prevent colonization of the fill surface by the microbe Pseudomonas aeruginosa, the species…