Mobile Navigation

Chementator

Member Exclusive

A more stable way to upcycle waste plastics

A new advanced recycling process simplifies the task of breaking down polymer chains and stabilizing the resulting fragments. The Hydrochemolytic technology (HCT), developed by Aduro Clean Technologies, Inc. (Sarnia, Ont., Canada; www.adurocleantech.com), involves processing waste plastic with water, an inexpensive…

Member Exclusive

Hydrothermal synthesis of cobalt-free lithium-ion-battery cathodes

Researchers at the U.S. Department of Energy’s (DOE; Washington, D.C.; www.energy.gov) Oak Ridge National Laboratory (ORNL; Oak Ridge, Tenn.; www.ornl.gov) have developed a hydrothermal-synthesis method for high-voltage lithium-ion battery cathodes that avoids several key issues with traditional battery processing. Key…

Member Exclusive

Harvesting hydrogen from humid air

Chemical engineers from the Swiss Federal Institute of Technology Lausanne (EPFL; www.epfl.ch), in collaboration with scientists from Toyota Motor Europe (Zaventem, Belgium; www.toyota-europe.com), have invented a photoelectrochemical (PEC) “artificial leaf” that splits water vapor into H2. The technology features a…

Member Exclusive

Quantum-based tool searches quadrillions of materials to optimize catalysts

For the first time, a quantum-computing-inspired tool has been used for catalyst discovery — specifically for the investigation of a new catalyst for the production of hydrogen via electrolysis. Created jointly by scientists from Fujitsu Ltd. (Tokyo; www.fujitsu.com) and the…

Member Exclusive

Carbon sequestration in synthetic construction aggregate

Blue Planet Systems (Los Gatos, Calif.; www.blueplanetsystems.com) and Sulzer Chemtech Ltd. (Winterthur, Switzerland; www.sulzer.com) have announced a partnership to accelerate development of Blue Planet’s process for mineralizing carbon dioxide gas into construction aggregate for concrete. By sequestering CO2 into the…

Member Exclusive

Capture ammonia reversibly with this new MOF

Production of ammonia by the Haber-Bosch process not only requires a lot of energy for the high-temperature (300–500°C) synthesis of NH3 itself, but the recovery of ammonia takes place by condensation at –20°C. As a result, large changes in both…

Member Exclusive

A colorful new way to visualize gaseous properties

Japan’s National Institute for Materials Science (NIMS; Ibaraki, Japan; www.nims.go.jp), along with Harvard University (Cambridge, Mass.; www.harvard.edu) and the University of Connecticut (Storrs, Conn.; www.uconn.edu), have designed a new imaging device that uses structural colors — visible colors that change…

Hydrogen-enabled recovery of raw materials from ‘red mud’ and other metallurgical waste

Bauxite residue (red mud) is a byproduct from the smelting of aluminum. Like other waste slags from the metallurgy industry, bauxite residue is traditionally put into hazardous-waste landfills, although it contains a mixture of valuable raw materials in low concentrations.…

Member Exclusive

Solvent-based regeneration of granular activated carbon

Granular activated carbon (GAC) can be used to remove polyfluoroalkyl substances (PFAS) from groundwater and drinking water, but current methods to regenerate spent GAC are costly and require high temperatures of greater than 1,000°C. A team of scientists at Battelle…

Member Exclusive

Wireless device detects coronavirus — no batteries required

A collaborative research group in Japan has engineered a self-sustaining device that can detect the presence of COVID-19 particles or droplets in air. The device, which requires no batteries, employs a magnetostrictive clad plate composed of iron, cobalt and nickel,…