Understanding boiler performance calculations can allow engineers to improve the operation of their facility’s steam system and better engage with boiler-system vendors Chemical plants, petroleum refineries, power plants and cogeneration systems use oil-and-gas-fired steam generators, fluid heaters and waste-heat boilers…
This column is based on “Propylene Oxide from Propylene and Chlorine – Cost Analysis,” a report published by Intratec. It can be found at: www.intratec.us/analysis/propylene-oxide-e11a. Propylene oxide (PO) is a highly reactive commodity compound that serves as a starting material…
The activated sludge process (ASP) is designed to speed up the rate of decomposition of waste material in water. First developed in 1914, it remains an important means of treating both municipal and industrial wastewaters. This one-page reference provides information…
Follow the guidance provided here to avoid many of the problems that can arise during the relocation of laboratory facilities The decision to move a laboratory from an existing space to a new research facility is often warranted. A merger…
A clean-in-place (CIP) system is among the largest users of consumables at a hygienic processing plant. Presented here are tips for reducing the consumption of water, chemicals and time in CIP operations In many industries there is a burgeoning awareness…
This column is based the report “LDPE via High-Pressure Tubular Process – Cost Analysis,” published by Intratec. It can be found at the following URL: www.intratec.us/analysis/ldpe-production-cost. Polyethylene (PE) is the world’s largest-volume commodity polymer, due in large part to the…
Corrosion is an obvious factor to consider when selecting materials of construction for process equipment. However, the chemical environment of the process is only the starting point in selecting an acceptable material. A set of other factors can complicate corrosion-resistance…
Changes in the availability of source data for the CE Plant Cost Index periodically necessitate updates to how the index is calculated The Chemical Engineering Plant Cost Index (CEPCI) is a widely used tool for comparing plant construction costs in…
There are many factors to consider when selecting a flare system for CPI sites that can impact safety, operating costs and environmental performance Flaring has long proven to be an effective technology for disposing of gases that cannot be used…
This column is based on “Isopropyl Alcohol Production from RG Propylene – Cost Analysis,” a report published by Intratec. It can be found at: www.intratec.us/analysis/isopropyl-alcohol-production-cost. Isopropanol (isopropyl alcohol) is among the most commonly produced lower alcohols — ranked third in…