I D
× COMMENTARYCOVER STORYIN THE NEWSNEWSFRONTS
Optimized Mixing
Improved equipment and controls, as well as continuous mixing, improve…
CHEMENTATOR + Show More BUSINESS NEWSTECHNICAL & PRACTICALFEATURE REPORTFACTS AT YOUR FINGERTIPSTECHNOLOGY PROFILEENVIRONMENTAL MANAGEREQUIPMENT & SERVICESFOCUS
Focus on Analyzers
Raman spectroscopy capability with bioreactor platforms BioPAT Spectro (photo) is…
NEW PRODUCTS + Show More SHOW PREVIEWS
Show Preview-IFAT
IFAT (rescheduled for September 7–11, Munich, Germany; www.ifat.de) is the…

Comment PDF Operations & Maintenance

Maintenance-Related Products

By Suzanne Shelley |

Prev6 of 10Next
Use your ← → (arrow) keys to browse

Non-contact gas bearing improve rotor balancing

Bently Bearings are pressurized air bearings that provide non-contact support for rotors during balancing operations. Specifically, the device produces a consistent signal that is exactly the same for each revolution, allowing for finer resolution during balancing operations, says the company. This helps to eliminate both damage to the rotor from hard rollers, and the mess of oil-film bearings in vacuum environments. Unit loading of air bearings has been demonstrated at over 400 psi, using 600-psi input pressure. With normal shop pressure of 100 psi, the air bearings will carry 60 psi unit loading. — New Way Air Bearings, Ashton, Pa.

www.newwayairbearings.com

 

Prev6 of 10Next
Use your ← → (arrow) keys to browse

Related Content
Focus on Maintenance Tools
Wireless condition monitoring for rotating machinery Last month, this company introduced the Sulzer Sense wireless IoT condition-monitoring system (photo). The…

Chemical Engineering publishes FREE eletters that bring our original content to our readers in an easily accessible email format about once a week.
Subscribe Now
CoriolisMaster: The SmartSensor solution
The Big 6 flowmeter technologies: Where to use them and why
Improving chemical production processes with IIoT and AI technologies
New filtration technology for highly corrosive media
PTA production: Lowering OPEX without compromising on quality

View More