I D
× COMMENTARYCOVER STORYIN THE NEWSCHEMENTATOR + Show More BUSINESS NEWSTECHNICAL & PRACTICALFEATURE REPORTFACTS AT YOUR FINGERTIPSTECHNOLOGY PROFILESOLIDS PROCESSINGENGINEERING PRACTICEENVIRONMENTAL MANAGEREQUIPMENT & SERVICESFOCUS
Focus on Valves
    A new motorized control valve for the semiconductor…
NEW PRODUCTS + Show More

Comment

Siemens working to validate 3D-printed burners at Göteborg Energi CHP plant

By Mary Page Bailey |

Siemens AG (Munich, Germany; www.siemens.com) and Göteborg Energi have come together in a cooperation agreement with the aim of testing state-of-the-art gas turbine technology that enables the operation of renewable fuels in the Rya combined heat and power (CHP) plant, which is today powered by natural gas.

siemens

Siemens turbines are being validated at a CHP plant in Sweden

As the first step, an SGT-800 test turbine has been installed at the Rya combined heat and power plant (CHP) for the validation of 3D-printed burners, which would then allow for testing of different fossil-free fuels in the plant. The production of gas turbine burners using additive manufacturing (AM) makes a decisive contribution to accelerating the research and development process for new technologies that contribute to a greener energy supply.

Recently, the AM team within Siemens Gas & Power initiated the development of a new accelerated validation process for new technologies and components and now this process is already at work in the Rya CHP plant. The special test engine is installed at the plant to support new developments. 

“The Rya CHP plant plays an important role in Gothenburg’s electricity supply,” said Alf Engqvist, CEO of Göteborg Energi. “Working together with Siemens we want to explore the possibilities for the conversion of both electric power and heat production as pieces of the puzzle in our work for fossil-free energy independence.”

Converting a coal power plant into a modern gas-fired combined cycle power plant, such as the Rya CHP plant in Gothenburg, can reduce carbon dioxide emissions by about two-thirds. By co-burning natural gas with an increasing share of hydrogen or biofuel, emissions can then be further reduced gradually.

“In our collaboration with Göteborg Energi we see the possibility to verify the viability of several different renewable fuels, such as hydrogen, on a larger scale, first in Sweden and then in other parts of the world,” said Thorbjoern Fors, CEO Siemens Distributed Generation and Oil & Gas Services Business. “With this cooperation, Göteborg Energi and the Rya CHP plant are driving innovation toward new solutions and green power together with us. Our goal is to run the SGT-600, -700 and -800 gas turbine combustors 100 percent fossil free, for example with hydrogen, in the near future,” continued Fors. “This is a unique cooperation between Siemens and a customer that can demonstrate the varied possibilities for sustainable and cost-effective fuels as our industry and societies look to reduce carbon emissions around the world.”

The Rya combined cycle power plant was delivered turnkey by Siemens 2006 and includes three SGT-800 gas turbines.

Related Content

Chemical Engineering publishes FREE eletters that bring our original content to our readers in an easily accessible email format about once a week.
Subscribe Now
Metering gas in biogas plants
Wet process analyzer for FPD and solar cell manufacturing for semi-conductors
Fluidized bed drying and cooling for temperature-sensitive polymers and plastics
CoriolisMaster: The SmartSensor solution
The Big 6 flowmeter technologies: Where to use them and why

View More