This company offers customized, optimized concepts for illuminating workspaces in accordance with EN 12464-1/-2, focused particularly on providing expertise in the switch to energy-efficient LED technology. The design includes all the relevant parameters and follows strict requirements as set out…
AFT Impulse 7 software (photo), a dynamic simulation and analysis tool used to calculate pressure-surge transients in liquid piping systems caused by waterhammer, has been recently updated with over 50 new and enhanced features. Users can create models using an…
The Sitrans Probe LU240 (photo) is this company’s newest ultrasonic level-measurement HART transmitter. Field-proven echo processing separates true material-level echoes from false, providing reliable readings while still allowing rapid response to actual changes in the material level. The device’s reduced…
SafeGuard (photo) is a predictive maintenance solution featuring wireless access and proactive alerts for all types of centrifugal pumps. SafeGuard allows both the pump and the motor to be remotely monitored at all times with continuous cloud connectivity. If an…
The Visconomic+ high-performance bead mill (photo) was developed specifically for processing very viscous and temperature-sensitive products. The rotor and stator configuration maximizes cooling-surface exchange, resulting in a high cooling capacity. This enables the temperature of the product to be regulated…
The Phoenix PLCnext Control RFC 4072S controller (photo) is the first high-performance controller for this company’s PLCnext Technology ecosystem. It can be used to leverage all the advantages of the control platform: programming in users’ preferred programming language and programming…
A solid grasp of pump sizing allows engineers to make effective economic and practical decisions about process pumps. This one-page reference provides information about two key parameters and other considerations for pump sizing. Pump sizing steps Sizing a pump requires…
This column is based on “Oxygen Production – Cost Analysis,” a report published by Intratec. It can be found at: www.intratec.us/analysis/oxygen-production-cost. Oxygen is a nonmetallic element and one of the most abundant elements on Earth’s surface. Under standard pressure and…
Pressurized condensate-return systems and flash-steam vent condensers offer opportunities for fuel cost savings in a plant’s steam system. Here’s how to take advantage Pressurized steam-condensate systems can provide plants with a minimum of between 15 and 35% savings in fuel…
As shown here, economical cooling is often achieved with a combination of both air and water cooling. Design considerations are also presented here For the last 40 years, air-cooled heat exchangers have become an indispensable part of many chemical, petroleum-refining,…