Mobile Navigation

Latest News

Level Measurement & Control

A new level detector for multiphase applications Multiphase level measurements exist throughout chemical process industries (CPI). They are especially significant in the oil-and-gas and petrochemical sectors due to the value derived from effectively separating water and hydrocarbons. While level instrumentation…

Member Exclusive

Using ‘coke’ to reduce CO2 emissions from steelmaking

Liberty Steel UK (LSUK; London; www.libertysteelgroup.com) has completed trials of ecoke — a sustainable new raw material that can replace anthracite, the main source of charge carbon used in the electric-arc furnace (EAF) of steelmaking, and reduce steel’s carbon footprint…

Member Exclusive

Scaling Up Hydrogenation Processes for Biomass Conversion

When scaling up new processes involving complex feedstocks, such as biomass, well-defined mixing is key. Guidelines presented here will help to efficiently move biomass hydrogenation reactions from the laboratory to commercial-scale operations One of the most promising pathways to biomass-based,…

Member Exclusive

New Applications for Spiral-Tube Heat Exchangers

A decades-old, yet less well-known type of heat exchanger offers advantages for new and emerging applications Spiral-tube or helically-coiled heat exchangers have been around for decades addressing sample cooling, mechanical seal cooling, vent condensers, vaporization and general heating or cooling…

Member Exclusive

Monitoring and Control Improves Dust Handling

As dust collection becomes an integral part of chemical processes, monitoring and other technologies promote efficiency and performance Dust control has always been important in the chemical process industries (CPI) due to the often toxic and combustible nature of the…

A portable conveying system for pharma and food products

This company has introduced a new manual dumping system with integral conveyor and separate dust collector (photo), which is suitable for dairy powders, pharmaceutical products and contamination-sensitive bulk foods. Designed and finished to 3-A sanitary standards, the system is composed…

Better stress distribution with this tool design

This company’s Wright Drive 2.0 socket design is said to distribute contact stress more effectively than other wrench systems. The Wright Drive 2.0 12-point design has up to 10 times more tool-to-fastener contact area than conventional 12-point wrenches. The design…

LanzaTech and Sumitomo Riko partner on sustainable isoprene production

LanzaTech, Inc. (Skokie, Ill.) and Sumitomo Riko Company Ltd. have entered into a joint-development agreement to reuse rubber, resin and urethane waste for the production of a key chemical intermediate, isoprene. Isoprene is produced by plants, and along with its…

Advanced mixing solutions for chemical plastic recycling

Sponsored by  Well over eight billion tons of plastic have been produced worldwide in the last 70 years, most of it since the turn of the millennium. Careless use of plastic has escalated into a global environmental problem. Unfortunately, the…

LG Chem to construct a ‘dry methane reforming’ facility to convert captured CO2 into plastics

LG Chem (Seoul, South Korea) will construct an innovative carbon mitigation facility that will produce raw materials for plastics using carbon dioxide to build its foundation to achieve 2050 Net Zero. LG Chem will construct a DRM (Dry Reforming of…