Latest News
A new converter for HART to Ethernet-APL
The new Ethernet-APL HART Converter (HM-APL-PCB; photo) enables transmitter manufacturers to easily convert existing HART transmitters to the new Ethernet Advanced Physical Layer (APL) interface. The printed circuit board (PCB) can be customized to incorporate special features or size requirements.…
New Profinet gateway for remote system redundancy
The new Profinet Gateways for the LB and FB Remote I/O systems (photo) enable the integration of Ethernet-based process control while providing access to complete diagnostic data. They support communication via HART on the instrument lines, connecting any data from…
Intralogistics systems with reliable, high-efficiency solutions
The new generation of high-efficiency IE5+ synchronous motors (photo) combine the benefits of this company’s modular system of gear units, motors and variable frequency drives (VFDs) with the possibility of reducing system variants through constant torque over a wide speed…
A dosing pump with more features, better performance
With the vipro-PUMP series (photo), this company is launching a totally new generation of dispensers. A new design, optimized dosing components and modular construction provide numerous opportunities for adapting the dosing equipment even more effectively to the relevant application. The…
New single-use pumps for biopharma applications
This company has extended its single-use product line of quaternary (four-piston) diaphragm pumps with the introduction of the next-generation QF5kSU (photo). Incorporating a patented valve-plate design that improves drainability and venting, the QF5kSU reduces the required minimum flowrate needed to…
A smart vacuum pump for mass-spectrometry applications
SmartVane (photo) is rotary vane pump with a hermetically sealed pump housing. The pump serves as a backing pump for mass spectrometers (ICP-MS, LC/MS), for applications in environmental and food analytics, as well as in pharmaceutical and clinical analytics. This…
A new optimizer tool for wet electrostatic precipitators
This company has launched a digital optimizer for the Editube wet electrostatic precipitator (WESP). The new WESP Optimizer improves the operation of the WESP unit by better adjusting it to changes in the overall process, and has important built-in functions…
A new way to monitor safety-valve activity
The LiftTrack 2.0 (photo) is a new indicator device for pressure safety valves (PSVs) that enables users to capture data on the various lift events that occur within a safety valve. The LiftTrack 2.0 device is connected to the valve…
Optimize boiler performance with these new air-gas flowmeters
The MT100 Series multipoint mass flowmeter (photo) provides air-gas flow measurements to help optimize boiler performance and reduce fuel consumption and greenhouse-gas emissions. These devices feature compact thermal-dispersion flow-sensor technology. They accurately monitor and report the flowrate or the totalized…
A new series of water sensors for nitrates and nitrites
The NT3100sc and the NT3200sc ultraviolet (UV) nitrate and nitrite sensors (photo) are designed with enhanced accuracy and a lower limit of detection at 0.02 mg/L. Leveraging reagent-free UV absorbance technology, NT3 Series sensors are equipped to meet a wide…