Mobile Navigation

Latest News

Capillary-fed electrolysis unlocks new levels of efficiency for green-hydrogen production

A new category of electrolysis could significantly lower the expenses associated with producing “green” hydrogen. In the new capillary-fed electrolyzer cell — designed by Hysata (Wollongong, Australia; www.hysata.com) based on research from the University of Wollongong (www.uow.edu.au) — water is…

Connected Plant Conference Show Preview

The 2022 Connected Plant Conference (CPC; www.connectedplantconference.com) will take place May 23–26 in Atlanta, Ga. The event offers a comprehensive technical program, with expert speakers providing insights on the practical aspects of digitalization, as well as updates on state-of-the-art technologies.…

Member Exclusive

A Primer on pH Measurement

Understanding the basic principles of operation and construction designs of glass membrane sensors can help in choosing the right pH sensor One of the most critical measurements in liquid chemical processing is pH. In this article, the importance of the…

Member Exclusive

Vent Away Condensate Pump Frustrations In A Flash

The guidance provided here can help to mitigate problems occurring in pumping systems used for condensate recovery Condensate recovery is crucial to energy reduction and water conservation in a steam-using plant. It reduces effluent discharge and treatment requirements, as well…

Detecting and Preventing Spills and Leaks

Comprehensive planning, along with appropriate level-measurement technologies and safety instrumented systems, can empower plant personnel to significantly reduce the likelihood and severity of hazardous chemical spills In most industries that manufacture, use or store chemicals and other hazardous liquids, a…

This gas detector finds volatile substances at very low volumes

The new X-pid gas detector (photo) quickly detects volatile organic substances, such as benzene, even at extremely low concentrations. To determine the concentration of certain hazardous substances, the device combines two measuring modes, optimally supporting strategies for measuring in hazardous…

Show Preview: IFAT Munich

IFAT 2022, the world’s leading trade fair for water, sewage, waste and raw materials management takes place from May 30 to June 3 at the Munich fairgrounds (www.ifat.de). More than 3,300 exhibitors from 58 countries will be displaying their equipment…

Member Exclusive

Tower Doctor: Should the Doctor Believe a Flowmeter?

Henry Kister shares lessons learned from troubleshooting distillation towers Many cooling-water systems do not have flowmeters. This is a tale about a cooling-water flowmeter that made a difference. As a startup superintendent at ICI Australia in the late 1970s, the…

Simulate hydraulic systems and prevent waterhammer

The Impulse 9 software suite (photo) was designed to enable engineers to better understand hydraulic systems during deviations from steady state by providing waterhammer and surge analysis, which helps to mitigate failures and avoid downtime. New features included with the…

Power supply units with IO-Link for field Installation

The compact PSU67 power supply units (photo) ensure energy-efficient, decentralized power supply in modular systems at ambient temperatures of –25 to 70°C. The units have protection to IP67 and are suitable for single- and three-phase applications in modular machine building.…