The RS5 sensor is used for shaft alignment, with a measurement range that covers spans of up to 10 m. Its five-axis technology offers simultaneous tracking in both planes for machine corrections, allowing live monitoring of horizontal and vertical machine…
1100 Series Magnetic Level Indicator (MLI) provides visual indication of liquid level within a larger, primary process vessel. Once the MLI is mounted to the vessel, the process liquid will flow freely up and down within the MLI chamber. Located…
With the release of DeltaV Virtual Studio v2.3, this company expands the virtualization capabilities in its DeltaV distributed control system (DCS) for easy implementation and management of on-line production and off-line development, test and training systems. While many large manufacturing…
SKF USA These all-spherical, two-piece washers optimize bolt mounting for machinery and bolted equipment. They automatically adjust under compression to compensate for up to 4 deg. of angular deviation, creating an exact parallel plane between the inner faces of the…
Charles Ross & Son The CDA-100 dual-shaft mixer is a 100-gal model that enables efficient powder dispersion and batch temperature control in the manufacture of both high- and low-viscosity formulations. The CDA-100 is equipped with an air-oil hydraulic lift for…
Blackmer The upgraded LGL Series “C” of sliding vane pumps offers square four-bolt flanges in addition to ANSI-style flanges. The four-bolt flange design allows for the use of multiple sizes and types of flanges, including 1.25, 1.5 and 2 in.,…
PSL This company’s simple filter dryer is intended for use in pilot-plant applications that require efficient filtration and drying. The equipment features a heated insulated jacket, a heated plate with filtration-media support (for enhanced draining capability) and a side discharge…
Gems Sensors The XM/XT Series of single-float transmitters is expressly designed to provide continuous fluid-level monitoring within smaller, more compact tank environments, specifically those with tank depths of less than 20 in. (50.8 cm). The XM/XT 300 Series of fluid-level…
Hapman The Tubular Drag Conveyor gently moves abrasive, blended or friable materials, including high-moisture-content ingredients and easy-to-compact materials without compromising quality. A versatile design allows for numerous configurations, with conveying occurring on multiple planes in any direction from numerous inlets…
Zetec The Weld Crawler is a weld-inspection tool, combining software and hardware into a modular design. It can be operated manually or motorized, and is easily converted from a circumferential to an axial scanner. All versions feature a clearance of…