I D
× COMMENTARYCOVER STORYIN THE NEWSNEWSFRONTSCHEMENTATOR + Show More
Chemical EngineeringChementator Briefs
Ethylene dichloride Recently, Chemetry (Moss Landing, Calif.; www.chemetrycorp.com) and Braskem…
BUSINESS NEWSTECHNICAL & PRACTICALFEATURE REPORTFACTS AT YOUR FINGERTIPSTECHNOLOGY PROFILEENGINEERING PRACTICEEQUIPMENT & SERVICESFOCUSNEW PRODUCTS + Show More

Comment Water Treatment

‘Switchable solvent’ technology is a promising development for advancing forward osmosis

By Gerald Ondrey |

Forward osmosis (FO), whereby a concentrated salt solution is used to “draw” water through a membrane from a less-concentrated salt solution (via osmotic pressure), has the advantage over reverse osmosis (RO) in that high pressures, with the associated pumps and energy requirements, are avoided. In addition, FO can be applied for concentrating brine solutions of much higher concentration (up to 25 wt.%) than seawater — such brines, as are produced in hydraulic fracturing, cannot be treated by RO, says professor Philip Jessop, Dept. of Chemistry, Queen’s University (Kingston, Ont., Canada; www.chem.queensu.ca). However, the main disadvantage with FO has been the cost-intensive step needed to regenerate the draw solution after it has been diluted. Now, a clever method — using a switchable solvent discovered and patented by Jessop — is being developed by Forward Water Technologies (FWT; www.forwardwater.com), the university’s spinoff company aiming to commercialize the technology, in cooperation with GreenCentre Canada (both Kingston, Ont.; www.greencentrecanada.com). Normally, diluted draw solution has to be regenerated by energy-intensive methods, such as evaporation or a temperature increase, or by a capital-intensive…
Related Content
A new membrane for forward osmosis
Many desalination technologies have been developed, but they usually require a large amount of energy. Forward osmosis (FO) has the…
CPI Bookshelf: September 2020
The following is a list of recently published books with relevance to the chemical process industries (CPI): Trevor Kletz Compendium:…

Andritz

The Influence of IIoT in the Dewatering Process Step of Pigment Production

Taking a look at dewatering, an important step at the heart of the colour pigment production process. By using a method for a calcined kaolin pigment as an example, we explain how an intelligent filter press can improve pigment production.

Chemical Engineering publishes FREE eletters that bring our original content to our readers in an easily accessible email format about once a week.
Subscribe Now
The influence of IIoT in the dewatering process step of pigment production
The Big 6 level measurement technologies, where to use them and why
Top five technologies for drying in chemical applications
Crude distillation unit (CDU) optimization
Upstream Oil & Gas: Automation intelligence from wellhead to distribution

View More