Three of the critical aspects of dust collection systems are properly identifying necessary dust capture points, effectively capturing dust at each point and accounting for solids loading in the ductwork. Key considerations for these aspects are presented here Dust collection…
New membranes enable traditional water treatment and emerging energy transition applications While membranes and filters have provided a reliable and cost-effective solution for water desalination, purification and treatment as well as specialty process separations, innovative membrane and filtration technologies are…
Current hydrogen demand is dominated by petroleum refining and fertilizer production, and is supplied largely by fossil-fuel-based steam-methane reforming (SMR). Increasingly, however, demand for hydrogen will come from the energy transition, and will be supplied by a more diverse range…
Calcium-sulfonate complex greases are widely used in applications in the pulp-and-paper, marine and steel-manufacturing sectors. Within an ever-volatile lithium market, calcium-sulfonate greases are increasingly seen as a reliable alternative to lithium-based greases. However, typical methods for preparing high-performance calcium-sulfonate grease…
The V-Cone Blenders utilize diffusion as the main mechanism for mixing. As the V-shaped vessel rotates on its horizontal axis, batch materials cascade down, distributing particles over a freshly exposed surface. With operating speeds of 5 to 25 rpm, this…
Plant Watch Agilyx polystyrene depolymerization plant commissioned in Japan June 7, 2024 — Agilyx ASA (Tigard, Ore.; www.agilyx.com) announced that its depolymerization technology was successfully demonstrated during commissioning of Toyo Styrene’s 10-ton/d chemical recycling facility in Japan. The recycling plant…
A research team led by Kenneth C. Neyerlin at the National Renewable Energy Laboratory (NREL; Golden, Colo.; www.nrel.gov), with members from Argonne National Laboratory (Lemont, Ill; www.anl.gov) and Oak Ridge National Laboratory (Tenn.; www.ornl.gov) has developed a membrane electrode assembly…
The ecoflow LDC1 M910S (photo) has a hydraulic output of 0.2 kW and was equipped with an Ex motor due to the hydrogen produced during the process. In accordance with the requirements of the application, it conveys water at up…
A new 1-ft 3 (28-L) capacity Vee Cone Blender model VB-1-SSIS (photo) is suitable for laboratory and pilot applications. Constructed and finished to sanitary standards, it is equipped with an internal spray line with intensifier bar for rapid dispersion of…
In this exclusive interview, Jens Cuntze, member of Clariant’s Executive Steering Committee, offers his perspective on the goals, challenges and accomplishments of the Business Unit Catalysts, as well as the challenges faced by the chemical process industries Jens Cuntze is…