The Model LB550 lump breaker (photo) can reduce agglomerates as large as 10 in. (250 mm) into particles with an average size as small as 0.08 in. (2 mm) with minimal heat generation or fines at rates from 2.4 to…
At PowTech 2019 this month (Nuremberg, Germany), Glatt Ingenieurtechnik GmbH (Weimar, Germany; www.glatt.com) introduced a waste-free process that recycles the phosphorus from sewage-sludge ash to produce ready-to-use, high-quality fertilizers. The market-ready process fulfills the legal obligation of the German fertilizer…
Many desalination technologies have been developed, but they usually require a large amount of energy. Forward osmosis (FO) has the potential to become an excellent alternative desalination technology due to its lower energy consumption. Nano structured materials have also attracted…
Palladium-catalyzed cross-coupling reactions are one of the most powerful and versatile methods to synthesize a wide range of complex functionalized molecules. However, the development of solid-state cross-coupling reactions remains extremely limited. Now, Hajime Itoh, Koji Kubota and colleagues at Hokkaido…
New column internals boost efficiency and improve reliability of distillation towers In the chemical process industries (CPI), the majority of separations are done via distillation columns. And, when the rest of the process relies upon those columns, inefficiencies, bottlenecks and…
Overpressure in a process can damage the seals in a pressure instrument’s sensor or skew the zero point. Here’s how to avoid the problem Pressure is one of the most commonly measured variables in the chemical process industries (CPI). Accuracy…
Closing off pressure upstream can minimize the need for pressure-relief systems to open, avoiding product waste and possible environmental damage Any system within a chemical process industries (CPI) manufacturing plant that is pressurized, or could experience pressure during an upset…
Adjustment and control of moisture levels in solid materials is a critical aspect in the manufacture of many chemical products. Drying can be defined as the vaporization and removal of water or other liquids from a solution, suspension, or other…
In late February, construction began on a test facility that will be used to demonstrate a CO2-capture process being developed by JGC Corp. (Yokohama, Japan; www.jgc.com) and Japan Oil, Gas and Metals National Corp. (JOGMEC; Tokyo; www.jogmec.go.jp). When the Texas-based…
The compound 2,5-furandicarboxylic acid (FDCA) is an attractive raw material that can be used to create polyethylene furanoate, which is a bio-polyester with many applications. One way of making FDCA is through the oxidation of 5-hydroxymethyl furfural (HMF), a compound…