Mobile Navigation

Automation & Control

This unit offers measurements for low flows in the milliliter range

The SLQ-HC60 (photo) fills a gap in the existing range of products for precise measurement in the low flowrate range, below 100 mL/min. This water-resistant meter operates without moving parts and can detect bubbles in the microliter range as well.…

Max-Trak Model 180

Max-Trak Model 180 Industrial Mass Flowmeters and Controllers are now available with 316-stainless-steel (ANSI or DIN) flange mounting for gas flowrates up to 1,000 L/min with pipe sizes up to 1 in. The major design enhancement of Model 180 is…

Flow calibrator with extended range dual manifold capability

Utilizing a two-meter manifold control system, the portable, automated Flow Gator calibrator (photo) operates in single viscosity fluids from 0.1 to 310 gal/min. Calibrations in multiple viscosities can be achieved from 0.35 to 310 gal/min. Instead of removing flowmeters from…

Current-to-pressure transducer is vibration and position insensitive

The Type-595XP Explosion-Proof Current-to-Pressure I/P Transducer (photo) is small and lightweight, yet is less sensitive to shock, vibration and position change than other I/Ps. The unit has a low power consumption and is intrinsic safe and explosion-proof, making it suitable…

Solvent recycling for HPLC analyzers

With the ability to reduce mobile-phase consumables by up to 90%, the SRS Pro Solvent Recycling System (photo) redirects untainted mobile phase to the solvent reservoir during isocratic HPLC (high-performance liquid chromatography) operation. Powered directly from a USB connection, with…

XTP600 oxygen transmitter

Michell Instruments The XTP600 oxygen transmitter (photo) is a self-contained oxygen transmitter for the process industries that measures oxygen content between 0.01 and 100%. Using the latest thermo-paramagnetic technology, the transmitter is almost drift-free. The XTP600 has no moving parts,…

Monitor hydrogen sulfide in water with these sensors

Electrochemical Devices S10 and S17 Sulfide Analytical Sensors (photo) provide accurate, reliable analysis of sulfide levels in water-treatment, sewage and wastewater-treatment applications. The S10 Sensor is an immersion- or insertion-style sensor, while the S17 is a valve-retractable-style sensor. Both feature…

RNS and RWS Series flowmeters

The RNS and RWS Series flowmeters are designed to measure non-condensing steam and saturated process steam at pressures of up to 150 psi in energy-related applications. Both series types have no moving parts and require negligible maintenance. All meters in…

Blue- and white-light LEDs provide illumination for this scope

Spectronics The CB-400 Cobra-4 borescope (photo) features a dual head blue- and white-light LED (light-emitting diode) to allow technicians to inspect and check for leaks in hard-to-see components without disassembly. The blue LED is designed for fluorescent leak detection while…

Plugging is not an issue with this phosphorus analyzer

ASA Analytics The ChemScan mini oP analyzer (photo) for ortho-phosphorus analysis features flow paths designed to avoid plugging. The analyzer uses large orifice sizes, compared to capillary tubes and needle valves of most other analyzers. The unit operates for three…