Mobile Navigation

Heat Transfer

This Series of thermal fluid heaters includes new sizes

With the addition of the ASME Code 16-mil. and 20-mil. Btu/h thermal-fluid heaters, these Btu fuel-fired horizontal heaters are now available from 2.4-mil. to 20-mil. Btu/h output. In addition, the firm offer fuel-fired vertical heaters from 0.2-mil. to 14-mil. Btu/h…

Problem-free pumping of heat-transfer fluids

Etanorm SYT is the latest generation of single-stage volute casing pumps, which were developed for applications in modern heat-transfer systems and hot-water circulation. Besides hot water, the pumps handle mineral-oil-based thermal fluids and synthetic thermal oils at temperatures up to…

Screw Heat Exchangers can do the Job

This firm recently delivered a screw heat exchanger to a client in Belgium that cools down more than 2,000 kg/h of rhenium, which is coming out of an incinerator at 850°C, to 150°C. The cooling is required because the hot…

Match the needed modules to meet your boiler requirements

The Universal Modular Boiler U-MB (photo) steam-boiler series uses the shell structure with three-pass technology in the performance range of up to 2,000 kg/h. The boiler consists of several modules that are selected specifically per order. The heat generating component…

Boiler-tube expanders with precise torque control

ESCO Technologies A full line of air-powered tube expanders and rolling motors for creating steel-to-steel mechanical seals in boilers, heat exchangers and condensers is available for sale or rent from this company. The Millhog tube expanders and rolling motors (photo)…

Sheet Molding Compound Preheater Cuts Cure Time By 50%

A new preheating system (photo) for plastic sheet molding compound (SMC) that uses radio frequency heating technology is now available. This new system is reported to enhance the distribution of reinforcement fibers in the molding process, which improves product quality…

Mix water and steam for a steady hot-water supply

The CSF Steam Water Mixer (photo) provides a safe, simple and reliable source of hot water delivered at the correct temperature and pressure, so it is suitable for cleaning and wash-down applications. These mixers are constructed from stainless steel and…

This all-in-one system features a small footprint

TLV This tracing manifold, trap station and condensate manifold system using the new M Series compact and high-performance steam tracing and condensate systems (photo) reduces design and specification time on tracing projects, says the manufacturer. Longterm maintenance and replacement costs…

Sheet Molding Compound Preheater Cuts Cure Time By 50%

A new preheating system for plastic sheet molding compound (SMC) that uses radio frequency heating technology is now available. This new system is reported to enhance the distribution of reinforcement fibers in the molding process, which enhances product quality and…

Dual-walled tube bundles keep fluids contained

This manufacturer of shell-and-tube heat exchangers has developed a new safety heat exchanger for applications where the fluids cannot be mixed or contaminated. Compared with the single-wall tube bundle, this double-wall design is characterized by a construction with two tube…