Mobile Navigation

Processing & Handling

Member Exclusive

Chementator Briefs [December 2022]

Li extraction A new technology is going to be introduced at the Schlumberger NeoLith Energy direct lithium-extraction (DLE) project in Clayton Valley, Nev. Developed by Gradiant Ventures (Boston, Mass.; www.gradiant.com), the technology enables high levels of lithium concentration (while simultaneously…

Member Exclusive

New smelting furnace enables the use of lower-grade ore in DRI ironmaking

In late October, Metso Outotec Corp. (Helsinki, Finland; www.mogroup.com) introduced the DRI (direct reduced iron) Smelting Furnace to substitute blast furnaces used in iron- and steelmaking. The furnace was developed to tolerate high-slag volumes, which are problematic for a conventional…

Member Exclusive

Using ‘coke’ to reduce CO2 emissions from steelmaking

Liberty Steel UK (LSUK; London; www.libertysteelgroup.com) has completed trials of ecoke — a sustainable new raw material that can replace anthracite, the main source of charge carbon used in the electric-arc furnace (EAF) of steelmaking, and reduce steel’s carbon footprint…

Member Exclusive

Scaling Up Hydrogenation Processes for Biomass Conversion

When scaling up new processes involving complex feedstocks, such as biomass, well-defined mixing is key. Guidelines presented here will help to efficiently move biomass hydrogenation reactions from the laboratory to commercial-scale operations One of the most promising pathways to biomass-based,…

Member Exclusive

Facts At Your Fingertips: Liquid-Liquid Extraction Basics

Liquid-liquid extraction (LLE) is a separation technique that exploits differences in the relative solubility of compounds of interest (the solute) in two immiscible liquids — most often an aqueous phase and an organic solvent. This one-page reference reviews basic information…

Chlorum Solutions uses thyssenkrupp nucera skid-mounted plant technology in Brazil

Chlorum Solutions LLC (São Paulo, Brazil) will use thyssenkrupp nucera AG & Co. KG (Dortmund, Germany) technology for its next two chlor-alkali plants in Brazil. The company has ordered two skid mounted plants with BM2.7 electrolysis technology from the supplier…

Member Exclusive

A process for making improved composite insulation material

Hollow silica particles (HSPs) are materials of interest for thermal insulation applications because of their very low thermal conductivity, but the particles pose health hazards and the powder is impractical to use, so scientists have been trying to incorporate HSPs…

Member Exclusive

Another step towards ‘green’ steel

Last month, Metso Outotec Corp. (Helsinki, Finland; www.mogroup.com) introduced NextGen Pelletizing — a visionary concept for the next generation of iron-ore pelletizing plants that strive to be carbon neutral and autonomous. According to the company, the combination of innovations —…

Member Exclusive

Sputtering process enables production of large, iridium-lean MEAs

Polymer electrolyte membrane (PEM) electrolysis uses a membrane-electrode assembly (MEA) that integrates the electrolyte membrane and electrode (diagram). Large-scale hydrogen conversion of electricity requires a large number of MEAs, which is a drawback for scaleup, because the MEA relies on…

Member Exclusive

Polymer-based Piping Systems: Meeting the Challenges of the CPI

Due to favorable properties, such as light weight and corrosion resistance, plastic-piping systems are suitable for a growing number of applications Over the past few decades, plastic-piping systems have been adopted in many different sectors of the chemical process industries…